Offshoreonly.com - Looking for Camshafts, Lifters, Intake, and Carb

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Looking for Camshafts, Lifters, Intake, and Carb (https://www.offshoreonly.com/forums/wanted/354499-looking-camshafts-lifters-intake-carb.html)

Dutchboy

06-08-2018 02:21 PM

Looking for Camshafts, Lifters, Intake, and Carb

I have a 509, stock rod, and crank making 9.2:1. Im looking for a cam that would work with this that's in good shape. something that will idle nice at low rpms (around the docs). I don't have a carb or intake yet. I was hoping to find a set of Johnson lifters. Victor Jr intake or similar. this is a very budget build, otherwise id order new, its just not in the cards. If anyone has a combination that worked well for them, please let me know.

Dutchboy

06-08-2018 02:22 PM

btw engine is a gen 6 roller 502 that is bored 4.500

Baja Rooster

06-08-2018 02:58 PM

Do you have the dog bone lifters? A 500EFI cam should fit the bill and a couple was for sale in the swap section.

Dutchboy

06-08-2018 03:06 PM

Quote:

Originally Posted by Baja Rooster (Post 4630983)

Do you have the dog bone lifters? A 500EFI cam should fit the bill and a couple was for sale in the swap section.

yes I do have the dog bone lifters but I think they are weak.

Baja Rooster

06-11-2018 11:15 AM

FWIW, Comp cams recommended the 900-16 lifters for my EFI525 cam running about 450# open pressure Cheap for brand new at $220. I wouldn’t buy used lifters unless you know the seller really well.

https://www.summitracing.com/parts/cca-900-16

freekazoid

06-13-2018 05:47 AM

i have some new gen 6 replacements and some lunati tie bars if your interrested. pics inn the swap shop.

All times are GMT -5. The time now is 01:22 AM.