Offshoreonly.com - Need 454+ Rotating assembly

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Need 454+ Rotating assembly (https://www.offshoreonly.com/forums/wanted/355864-need-454-rotating-assembly.html)

OCCJoe

08-06-2018 11:13 PM

Need 454+ Rotating assembly

So I had a crank , Dimple rods and some 30 over Ross pistons but apparently the machine shop wanted them worse then I did . Whats out there ? I will be blowing a little air into the block

BBYSTWY

08-06-2018 11:47 PM

if you're talking about the stock GM "dimple" rods...I have the set that came out of my 525 sc I just rebuilt...still have the stock pistons on them...if you're interested let me know

Stewart

snapmorgan

08-07-2018 09:09 AM

I have an Eagle crank, Eagle H beam rods and a new set of .040 over 454 mag pistons (small dome) if you are interested.

90viper

08-07-2018 09:20 AM

I have .030 over forges Mercury flat top pistons. Brand new in Mercury box

90viper

08-07-2018 09:21 AM

Forged sorry spell check

OCCJoe

08-07-2018 10:29 AM

Pm's sent .. With this kind or response in such a short amount of time I should be able to come up with something

freekazoid

08-07-2018 09:08 PM

i have a stock forged gen 5/6 crank and 7/16 dimple rods. never been cut.

All times are GMT -5. The time now is 06:15 AM.