So I had a crank , Dimple rods and some 30 over Ross pistons but apparently the machine shop wanted them worse then I did . Whats out there ? I will be blowing a little air into the block

if you're talking about the stock GM "dimple" rods...I have the set that came out of my 525 sc I just rebuilt...still have the stock pistons on them...if you're interested let me know

Stewart

I have an Eagle crank, Eagle H beam rods and a new set of .040 over 454 mag pistons (small dome) if you are interested.

Pm's sent .. With this kind or response in such a short amount of time I should be able to come up with something

i have a stock forged gen 5/6 crank and 7/16 dimple rods. never been cut.