Offshoreonly.com
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Wanted (https://www.offshoreonly.com/forums/wanted-244/)
-   -   Looking for a 502 Long Block-TX (https://www.offshoreonly.com/forums/wanted/356017-looking-502-long-block-tx.html)

Sick Stinger 08-29-2018 10:08 AM
I’ll have it in House this weekend. I’ll split shipping in it.
compete long block, headed block crank rods Pistons cam basepan lifters push rods ect.

90viper 09-03-2018 12:57 PM
PM sent. Sorry for the delay. Work keeps messing up my play time.

90viper 09-03-2018 01:04 PM
F-2 Speedy. I will be headed to Table Rock in a few weeks. Can bring with me if interested. Due to my delay I need to give op time to respond. Includes pan and black valve covers. Does not have balancer or flywheel since a spare motor but sure I can come up with one.

F-2 Speedy 09-03-2018 02:28 PM
Originally Posted by 90viper (Post 4647026)
F-2 Speedy. I will be headed to Table Rock in a few weeks. Can bring with me if interested. Due to my delay I need to give op time to respond. Includes pan and black valve covers. Does not have balancer or flywheel since a spare motor but sure I can come up with one.
I had a buddy interested in the 525, what condition is it

90viper 09-03-2018 02:41 PM
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!

90viper 09-03-2018 02:51 PM
Like the 502 MPI it has been in climate control storage for around 4 years

F-2 Speedy 09-03-2018 03:15 PM
Originally Posted by 90viper (Post 4647044)
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!
I'll pm you my info if you have some pics ?? have the heads been plugged for running without the heat exchanger

Sick Stinger 09-03-2018 03:34 PM
Just got the motor in, it’s a gen 6 motor.

90viper 09-03-2018 05:51 PM
No it was a backup for my Donzi

F-2 Speedy 09-03-2018 06:58 PM
Originally Posted by 90viper (Post 4647064)
No it was a backup for my Donzi
is it a complete long block including valve covers, whats the asking price you can send me a pm and Ill let my guy know


All times are GMT -5. The time now is 06:58 PM.
Page 3 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.