Looking for a 502 Long Block-TX
09-03-2018 | 01:04 PM
#23
Registered
Joined: Apr 2015
Posts: 570
Likes: 18
From: Deer Park,TX
F-2 Speedy. I will be headed to Table Rock in a few weeks. Can bring with me if interested. Due to my delay I need to give op time to respond. Includes pan and black valve covers. Does not have balancer or flywheel since a spare motor but sure I can come up with one.
09-03-2018 | 02:28 PM
#24
Platinum Member
Joined: May 2012
Posts: 11,427
Likes: 3,953
From: Midwest & T-Rock
I had a buddy interested in the 525, what condition is it
09-03-2018 | 02:41 PM
#25
Registered
Joined: Apr 2015
Posts: 570
Likes: 18
From: Deer Park,TX
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!
09-03-2018 | 03:15 PM
#27
Platinum Member
Joined: May 2012
Posts: 11,427
Likes: 3,953
From: Midwest & T-Rock
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!
Last edited by F-2 Speedy; 09-03-2018 at 03:17 PM.
