|
Imco -3’s
Looking to purchase two Imco -3 lowers I also have -2’s I would be willing to trade |
Bravo 1 1.5 drives |
If you are bolting these to stock Merc uppers you will probably need to clearance the upper to have at least 1/2 inch between the prop tips and the underside of the cavitation plate.
I rolled the tips on an old prop before I realized 1/4 inch was NOT enough. |
Clearance
Originally Posted by Tinkerer
(Post 4654218)
If you are bolting these to stock Merc uppers you will probably need to clearance the upper to have at least 1/2 inch between the prop tips and the underside of the cavitation plate.
I rolled the tips on an old prop before I realized 1/4 inch was NOT enough. So what did you end up doing? Notch the cavitation plate? |
| All times are GMT -5. The time now is 07:44 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.