Imco -3’s
10-14-2018 | 08:58 PM
#3
Registered
Joined: Jan 2002
Posts: 4,612
Likes: 7
From: ALTO, MI
If you are bolting these to stock Merc uppers you will probably need to clearance the upper to have at least 1/2 inch between the prop tips and the underside of the cavitation plate.
I rolled the tips on an old prop before I realized 1/4 inch was NOT enough.
I rolled the tips on an old prop before I realized 1/4 inch was NOT enough.
10-16-2018 | 06:33 AM
#4
Thread Starter
Registered
Joined: Oct 2010
Posts: 204
Likes: 2
Clearance
So what did you end up doing? Notch the cavitation plate?
