4” clamp on mufflers for dry tails...
05-31-2019 | 03:16 PM
#1
Thread Starter
VIP Member
Joined: Mar 2008
Posts: 892
Likes: 83
From: Maine
4” clamp on mufflers for dry tails...
Yup, you read that right; I need 2 sets of 4” clamp on mufflers that’ll work with fully dry tails, or Gatling inserts for 3.5” id inner pipes. I dump all my h2o over the side. Motors are 580ci 780hp/side.. thanks.
Last edited by Rhythm and Blues; 06-01-2019 at 10:46 PM.
06-03-2019 | 11:26 AM
#2
Registered
Joined: Oct 2011
Posts: 273
Likes: 4
From: Dayton, OH/Burnside KY
I went through looking for something like this about a year ago. I have a 408ci LS with full dry exhaust and also dump my water through thru-hull fittings. The big problem I found was everybody's mufflers require water to keep them from burning up. I ended up making a set of my own using GBB inserts, 4" polished stainless pipe and polished clamps. A little welding and they work great!!! They were also a ton cheaper than normal marine mufflers. Hope this helps you.
This is without the mufflers
This is with the mufflers. They make a really big difference. Mine are the 3 ring sport. I wish I would have gone with the comp series to get some more noise out of them, but these sound good and are great when I have my little girls on the boat.
Hope this helps you out!!!
This is without the mufflers
This is with the mufflers. They make a really big difference. Mine are the 3 ring sport. I wish I would have gone with the comp series to get some more noise out of them, but these sound good and are great when I have my little girls on the boat.
Hope this helps you out!!!
06-03-2019 | 11:55 AM
#3
Thread Starter
VIP Member
Joined: Mar 2008
Posts: 892
Likes: 83
From: Maine
I went through looking for something like this about a year ago. I have a 408ci LS with full dry exhaust and also dump my water through thru-hull fittings. The big problem I found was everybody's mufflers require water to keep them from burning up. I ended up making a set of my own using GBB inserts, 4" polished stainless pipe and polished clamps. A little welding and they work great!!! They were also a ton cheaper than normal marine mufflers. Hope this helps you.
This is without the mufflers
https://www.youtube.com/watch?v=6C-30yHAhlQ
This is with the mufflers. They make a really big difference. Mine are the 3 ring sport. I wish I would have gone with the comp series to get some more noise out of them, but these sound good and are great when I have my little girls on the boat.
https://www.youtube.com/watch?v=J6R7XO1WVYo
Hope this helps you out!!!
This is without the mufflers
https://www.youtube.com/watch?v=6C-30yHAhlQ
This is with the mufflers. They make a really big difference. Mine are the 3 ring sport. I wish I would have gone with the comp series to get some more noise out of them, but these sound good and are great when I have my little girls on the boat.
https://www.youtube.com/watch?v=J6R7XO1WVYo
Hope this helps you out!!!
06-03-2019 | 12:01 PM
#4
Registered
Joined: Oct 2011
Posts: 273
Likes: 4
From: Dayton, OH/Burnside KY
Well ****, that really sucks!!! I was going to order some comp series ones to build another set. Guess that'll have to wait till next year.
