500 EFI Parts needed - Pulleys, water manifold, brackets, lectrical, etc
#1
Registered
Thread Starter
500 EFI Parts needed - Pulleys, water manifold, brackets, lectrical, etc
Let me now if you have:
Pulleys (with mandrels), Wiring - ecu, a water/tstat manifold, any brackets for rear electrical or Alternator.
Building a pair of 500 efi's out of 502 SB's.
Can email me at [email protected]
Thx!
Pulleys (with mandrels), Wiring - ecu, a water/tstat manifold, any brackets for rear electrical or Alternator.
Building a pair of 500 efi's out of 502 SB's.
Can email me at [email protected]
Thx!
#5
Registered
Thread Starter
I've have the intakes covered, minus a fuel rail.
Open on what to do with the wiring and ecu, as I have the option of running my 502 MEFI 1 and harness - sending the ecu to ASM.
Open on what to do with the wiring and ecu, as I have the option of running my 502 MEFI 1 and harness - sending the ecu to ASM.
#6
Registered
Thread Starter
Just saw your email, gmail stuck it in junk. Let me know what your thinking for the electrical. I have a line on the lower/rail, but I guess shoot me what you're thinking.
#8
Registered
Thread Starter
#9
Registered
Thread Starter