I need a bravo one upper yoke/input shaft
 

Hey Fellas, I'm looking for an input shaft/upper yoke. My coupler blew and chewed up the shaft. I swapped out the coupler and need a shaft for the drive. It's a 2006 bravo one drive with the u joint retainer clips on the inside face of the u joint portion of the shaft. It has 17 splines.

Anybody have a lead on a good condition used one?

I can find them new but in canadian dollars they're like $400. I'd rather a good used one for much cheaper.

Thanks!!

I have a brand new unused input shaft. Let me know if interested. You’ll have to check the bearing cap diameter you have.


https://cimg5.ibsrv.net/gimg/www.off...a07dcbd5c.jpeg

I should have a whole yoke assembly

Here's a few more measurements to ensure it's the right shaft.

17 spline
Cup OD is 1.0670"
Shaft length is 9.5"

Hope that helps.

I have one. 17 splines, 9.5". Inside U-joint clips.
I'm not sure what you mean by cup diameter. The U-joint is still attached and is in perfect condition. Shipping to Canada could be quite expensive as it is heavy but I am near the border in metro Detroit if that helps. $60 US + shipping.
https://cimg0.ibsrv.net/gimg/www.off...7afcd46f0e.jpg
https://cimg3.ibsrv.net/gimg/www.off...d2dd69eeb1.jpg
https://cimg6.ibsrv.net/gimg/www.off...e7d9c40ef6.jpg
https://cimg7.ibsrv.net/gimg/www.off...c3a41b7bdd.jpg
https://cimg8.ibsrv.net/gimg/www.off...db00745a26.jpg

If the U joints are in good shape that is a great deal. You could remove the U joint from the input shaft and then replace the caps for use later. An input shaft for 80CAD plus ship and have the other parts if ever need

U-joints are in perfect shape with low hours.