Hello,

Looking for (2) good Bravo HP Transom assemblies. Preferably newer and in good shape, tight etc. Thank you!

MERCRUISER HP/ RACE, BRAVO GIMBAL TRANSOM ASSEMBLY MERCURY RACING | eBay

Mercury Racing HD BRAVO TRANSOM PLATE with Trim Cylinders OEM 6-6511002NZ "NEW" | eBay

I have 2 that have been pulled apart and re-finished. Have not been reassembled yet. I’ll upload pictures this weekend.

Was going to use them but ended up picking up a pair of extension boxes that had assemblies on them. Going to keep them paired

ok great yes send me a pic when you can. Thank you.

I have 2 hp transom assembly give me a call or text 9174051069

Here are some pictures. Hardware and hydraulic lines are included. Completely stripped every part down and used a zinc chromate primer, 3 coats of phantom black and 3 coats of clear. I painted them back in November and I haven’t polished them yet.

I have 2 nice low hour freshwater assemblies with rams, lines and inner plates id sell for $1,800 each. If you’re interested text me at (508) 631-4784

They look clean. How tight are they at the steering pin? Is that all redone too?

we’re these converted to use hp helmets? Never seen an hp transom plate with the lower carriage bolts that zincs thread onto

Yes, they were converted. I purchased them that way from another member here.