Single engine race boat
#2
Registered

Joined: Mar 2001
Posts: 1,239
Likes: 113
From: Oakville,ON
#8
Registered
Joined: Aug 2016
Posts: 20
Likes: 2
I posted a thread in the classic section .... I have a ad on Craigslist.
https://cleveland.craigslist.org/boa...303900442.html
No power
no drive
10,000 obo.
comes with trailer
has extension box
i have exhaust for it.
many questions feel free to ask
If you need pics I have tons of them.
pic of the trim tabs, steering and extension box
[img]blob:https://www.offshoreonly.com/2c0e8993-3dec-4320-a5e8-6ecd32d131a0[/img]
https://cleveland.craigslist.org/boa...303900442.html
No power
no drive
10,000 obo.
comes with trailer
has extension box
i have exhaust for it.
many questions feel free to ask
If you need pics I have tons of them.
pic of the trim tabs, steering and extension box
[img]blob:https://www.offshoreonly.com/2c0e8993-3dec-4320-a5e8-6ecd32d131a0[/img]
#9
Registered
Joined: Aug 2016
Posts: 20
Likes: 2
#10
Registered

Joined: May 2009
Posts: 1,941
Likes: 526
25k, no engine, exhaust, drive, or smartcraft gauge and wire. It has a full mercruiser harness from engine plug to dash, i used it for the ignition and ground, so the boat is ready for full gauges. It could be a class 5 or 6 raceboat depending on outdrive.
this boat was laid up in the mold as a race boat with crash bulkheads. It raced 1 season back in 96, it was stored for 20 years when i got it from the guy who built and raced it.
Full rebuild, wiring, steering, 65 gal gas tank, The engine is moved 1 foot forward now, and there is room to go another foot.
every drain and rigging hole, the transom cutout, exhaust holes etc have 2 layers of glass, there is not one piece of exposed wood anywhere.
496HO, pushes it to 73 w/25 pitch 3 blade. 74 /12 w/ a 27 pitch 3 blade.
3900 pounds dry, 26 length, 8 beam. Trailer has 2 week old tires.
No issues with boat, equipment or trailer. All gel, no paint. The hull has maybe 100 hours total. All i've done is run back and forth in the river the last 3 years. It really needs to be raced again.
tape on sides of boat in pics where from the start of prop testing and wanted to see where water was breaking off hull.




Engine room rigging

Under dash rigging

this boat was laid up in the mold as a race boat with crash bulkheads. It raced 1 season back in 96, it was stored for 20 years when i got it from the guy who built and raced it.
Full rebuild, wiring, steering, 65 gal gas tank, The engine is moved 1 foot forward now, and there is room to go another foot.
every drain and rigging hole, the transom cutout, exhaust holes etc have 2 layers of glass, there is not one piece of exposed wood anywhere.
496HO, pushes it to 73 w/25 pitch 3 blade. 74 /12 w/ a 27 pitch 3 blade.
3900 pounds dry, 26 length, 8 beam. Trailer has 2 week old tires.
No issues with boat, equipment or trailer. All gel, no paint. The hull has maybe 100 hours total. All i've done is run back and forth in the river the last 3 years. It really needs to be raced again.
tape on sides of boat in pics where from the start of prop testing and wanted to see where water was breaking off hull.




Engine room rigging

Under dash rigging

Last edited by outonsafari; 05-29-2021 at 05:54 PM.


