Bravo 1 Gimbal Housing or Transom Assy.
#1
Thread Starter
Registered

Joined: Jul 2015
Posts: 1,201
Likes: 89
From: Atlantic Southeast
Located in Florida but willing to pay shipping for a quality Gimbal Housing which I prefer over a Transom Assembly which must be in Florida for pickup.
I don't want parts that need reconditioning, refurbishment nor broken/stripped.
Looking for good paint without lifting, scratches, pits, fading, etc. No corroded pieces please.
My drive is circa 1996 serial #OF813383 Tramsom #OF861319
Email me direct please with your offering or any leads to these parts: [email protected]
Thanks
I don't want parts that need reconditioning, refurbishment nor broken/stripped.
Looking for good paint without lifting, scratches, pits, fading, etc. No corroded pieces please.
My drive is circa 1996 serial #OF813383 Tramsom #OF861319
Email me direct please with your offering or any leads to these parts: [email protected]
Thanks
#2
Registered

Joined: Jun 2009
Posts: 952
Likes: 83
From: East Greenwich, RI
I have 2 standard and 2 HP
theyre used and good condition. Sounds like you are looking for new.
PARTS - Steering, Bravo Transom Assemblies, 280 Tabs, Props
theyre used and good condition. Sounds like you are looking for new.
PARTS - Steering, Bravo Transom Assemblies, 280 Tabs, Props
#3
Thread Starter
Registered

Joined: Jul 2015
Posts: 1,201
Likes: 89
From: Atlantic Southeast
I have 2 standard and 2 HP
theyre used and good condition. Sounds like you are looking for new.
PARTS - Steering, Bravo Transom Assemblies, 280 Tabs, Props
theyre used and good condition. Sounds like you are looking for new.
PARTS - Steering, Bravo Transom Assemblies, 280 Tabs, Props
Mine are 26 years old and look damn near near other than one of them somehow winding up with a ping pong ball size hole below the raw water hose inlet. No clue how it would corrode locally like that when the rest of it displays zero sign of issue.



