Looking for 1 - 2 piece oil cooler bracket for HP500 oil cooler. This is the one that bolts to he top of the bell housing. Needs to be in decent shape to be cleaned up and repainted if needed.

What is your exactly asking?

I am looking for 1, of the 2 piece clamps like the ones in the picture, the ones shown are fine except need some new paint. Need an additional one for another engine.

any luck???
i will also be moving oil cooler to rear of eangine, need to make up some brackets.

thanks

Nope, you can still buy them from Mercury for about 100 bucks each or make them out of SS Worm Clamps with rubber hose around them for about $10 My Magnum motors are that way and they stay in place just fine and easy to tilt for draining.

well ,,,there are mounting brackets on cp performance,,,but i also google 3 inch mounting brackets got alot of results. i see a moroso clamp that would work for 15 bucks.

I have one of these that came from the top of an older mercruiser 260 bellhousing. For 2 1/8" OD cooler

I have done billet ones here

Send me a pic.. 816.eight zero 4.631 one.
Thanks