seawater pump bracket and idler Gen vi
#1
Registered
Thread Starter
seawater pump bracket and idler Gen vi
I am looking for the bracket and idler pulley for the seawater pump on a Gen V 454 . I have a V belt setup .
Last edited by tooslow; 07-02-2022 at 01:16 PM.
#3
Registered
Thread Starter
Tom you are probably correct . It's going on a Gen VI but from what you say Gen V had the v belts . Basically I'm replacing a Mark IV long block with a Gen 6 long block and trying to use the old accessories except for raw water pump . I'm going to try to change the title . Thanks .
Last edited by tooslow; 07-02-2022 at 01:16 PM.
#4
Platinum Member
Platinum Member
iTrader: (6)
only the mod's can change the title...Griff, Speedgirl