Offshoreonly.com - Old 454 distributor

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Old 454 distributor (https://www.offshoreonly.com/forums/wanted/379166-old-454-distributor.html)

zz28zz

05-06-2023 07:38 PM

Old 454 distributor

Looking for an old dist to convert into a oil pump drive tool. Idea is to remove cam gear and cut top off the dist shaft so I can attach a 1/2" drill. Don't need pickup coil, reluctor, etc.

boostbros

05-07-2023 06:13 AM

any small or big block dist will work just cut the teeth of the gear

SB	05-07-2023 06:22 AM

If you don’t find a cheaper used one, $41 free shipping china hei’s on amazon. 4.3/5.0/5.7/ 7/7.4l….same length.

sailtexas186548

05-07-2023 12:44 PM

they are $21 on summit not even worth trying to DIY one IMO

https://www.summitracing.com/parts/SUM-901015

zz28zz

05-07-2023 03:12 PM

Quote:

Originally Posted by boostbros (Post 4866898)

any small or big block dist will work just cut the teeth of the gear

The ones I remember had a roll pin attaching gear to shaft.Drive out the pin and the gear slides right off.

zz28zz

05-07-2023 03:17 PM

Quote:

Originally Posted by sailtexas186548 (Post 4866920)

they are $21 on summit not even worth trying to DIY one IMO https://www.summitracing.com/parts/SUM-901015

Can those be used hands-free?I need to build oil press with exhaust manifold off to find oil leak down low somewhere.

zz28zz

05-07-2023 03:17 PM

Duplicate post.

All times are GMT -5. The time now is 05:18 AM.