Guys,

I would like to run my engine on the stand, outside of the boat, to confirm no leaks and such. I would also like to rig up a 9-pin cannon extension to actually connect the engine to the dash. I wonder if anybody has these items laying around. I know it's a long shot, but it's worth the ask.

Thanks. Brad.

I have 2 that I just cut off my 1979 wellcraft that had the mercruiser/pre alpha set up.

Ryan,

Not to get greedy.... Wouldn't happen to have the mating part, would you? The engine harness...?

Thanks. Brad.

I should be able to come up with at least 1, let me do some digging

Ryan,

That would be awesome. LMK.

Thanks. Brad.

Found one but I they dont want to go together, the male side (dash side) has 3 big pins and the female side only has 2 big spots

Ryan,

The engine side is the expensive one (new) that I can't seem to find used elsewhere. Yours matches what I've got on my engine and I can find a dash side connector on eBay for relatively cheap. Whatcha want for it?

Thanks. Brad.

Brad , I have two boat side harnesses. 100 for both.

Tom,

$50 for one....?

How long is the pigtail? Just need to see if I can piece this all together.

Thanks. Brad.