25 sxt performance
 

New here guys.. HELLO.. have a 24 euro from New still, and finally got my dream after 20 years..an sxt 25.

I am looking to break 100 mph, what realistically can be done without starving my wife and kids all winter long..

It has a 454 . 490 hours on a 365 magnum, reworked heads, STOCK CASTINGS, 850 holley, single plane highrise intakeand a steep cam . Maybe 420 HP tops?? it runs a 26 4 blade @ 78.9 mph. 5800 rpm. I put a Blackhawk with 28's on for a weekend and it did 85.8 @5950 rpm. handling was HORRIBLE with the hawk.

any help would be greatly appreciated THANK YOU !

You will need a lot more power to start. Excess of 750 or so plus a 2 in shorter drive. What year sxt is it? The early ones were pretty heavy. I always wondered how a blackhawk would run on one. I had a 25 and it was fun. I got to mid 80's with 650 or so. Also I hope you a hydraulic steering you will kill yourself without it.

Well, I am hitting just @ 104-108 MPH with a 540BBC with 14-71 and (2) 850's. and a BMAX..stay away from the shorter drive's on that tunnel..I'm tuned for 91 and run @ 7.5 lbs of boost. Est HP @ 800-850Hp on pump gas running a labbed 28 4 blade.

thanks.. what rpm are you running? and I guess you got a 1:36 also ?
the Bmax is standard X dimension?

its a 1990. the hawk is great on top end, but getting up to speed it crabs all over the place and has a tendency to DART severly under 75 mph.

no hydraulic steering yet.

Turning @ 5800 with the labbed 28 and @ 5000 with a stock 30 4 blade. And yes, the 1.3 on the drive.

That's what the shorter drives will do also. Faster top end but the rest is terrible.

i just bought my 25 sxt at the end of this summer and so far i think its gnna be a really fun boat. simple, easy to trailer/store, easy to work on.

completely re rigged the entire boat. finished it tonight. new motor, interior, wiring, gauges, etc....all i have left to do is mount my swim platforms....i got a couple that my buddy took off his eliminator.

i put my 468 making around 500 hp.

-race ported and polished and shaved 990 heads/single plane weiand xcelerator intake (2.25 int/ 1.92 ex
-isky roller set
-diamond pistons
-h beams
-steel crank
-hei ignition
-polished aluminum pulley set (good for at least 100 hp right??? lol)
-850 holley
-9.5 compression


i set it up with an open engine bay (with hatches on the sides) and jet boat style water injected super comp chrome long tube headers. they sound badass.

hittin the water tomorrow.

runnin a race finish 28p prop on a bravo 1 with nose cone and low water pickup.

ive never run this boat before as it was just a hull when i bought it.....any predictions on speed??? lol

(ive got my 509 with a b&m 250 ready if its not fast enough. lol)

Show us some pics!! What year??

its a 1990! its blue black and white. but i think imay wrap it. theres a shop here in town that does some amazing wraps on boats......

how do i post pics to this thread???