Offshoreonly.com
0 2020/04/29 13:44:05
0 2020/05/07 17:53:22
0 2020/05/07 18:04:42
0 2020/05/07 18:04:48
0 2020/05/07 18:04:58
Dont forget to mark the relation way down inside With some white paint Basically so when u put it back on u line it Up
Dont forget to mark the relation way down inside With some white paint Basically so when u put it back on u line it Up
0 2020/05/07 18:09:33
0 2020/05/07 18:09:39
I didnt need this it locks the shaft so u can remove The lock nut spanner and the hollow bolt below I used the small impact and it removes it nicely.
I didnt need this it locks the shaft so u can remove The lock nut spanner and the hollow bolt below I used the small impact and it removes it nicely.
0 2020/05/07 18:09:45
The hollow bolt is what we are removing Which releases the pt from the shaft Note shims
The hollow bolt is what we are removing Which releases the pt from the shaft Note shims
0 2020/05/07 18:11:01
Here it is right out of the book of How u work on turbines Gotta take all those little bolts out Think there is like 100
Here it is right out of the book of How u work on turbines Gotta take all those little bolts out Think there is like 100
0 2020/05/07 18:43:05
0 2020/05/07 18:43:11
0 2020/05/07 18:48:49
The balance heavy mark is clearly visible The second gp rotor is removed And the spacer and sealing disc stayed behind Which will remove with a internal puller. We have to remove everything until we get to The last stage in the compressor.. when i rotate this now i can still hear something in There possibly what jim said. I do not see any blades Damaged or rubbing
The balance heavy mark is clearly visible The second gp rotor is removed And the spacer and sealing disc stayed behind Which will remove with a internal puller. We have to remove everything until we get to The last stage in the compressor.. when i rotate this now i can still hear something in There possibly what jim said. I do not see any blades Damaged or rubbing
0 2020/05/07 18:59:57
0 2020/05/07 19:08:43
0 2020/05/08 05:35:16
0 2020/05/08 07:11:00
This disk prys up now becareful not to Tweak it It was on there pretty good
This disk prys up now becareful not to Tweak it It was on there pretty good
0 2020/05/08 07:27:15
0 2020/05/08 07:34:33
I really could not see under there yet thru the gp noz Bolt holes
I really could not see under there yet thru the gp noz Bolt holes
0 2020/05/08 07:44:00
See the jack screws
See the jack screws
0 2020/05/08 07:44:12
Bearing housing and pinch plate is now removed exposing the bearing Take note on the three crush seals Im gonna shine a flashlight thru the holes to see If i can see anything!
Bearing housing and pinch plate is now removed exposing the bearing Take note on the three crush seals Im gonna shine a flashlight thru the holes to see If i can see anything!
0 2020/05/08 07:44:23
0 2020/05/08 08:07:30
This is how i could finally view it
This is how i could finally view it
0 2020/05/08 09:37:46
I had to compile a bunch of my surrounding Items. Can u tell?
I had to compile a bunch of my surrounding Items. Can u tell?
0 2020/05/08 09:37:58
0 2020/05/08 09:45:15
Here is the oil return line that was getting bashed It looks worse in picture and put about 80 psi of air To it and it did not leak
Here is the oil return line that was getting bashed It looks worse in picture and put about 80 psi of air To it and it did not leak
0 2020/05/08 16:06:25
The very top of the centrifical is visible It was dancing on the top of this
The very top of the centrifical is visible It was dancing on the top of this
0 2020/05/08 16:06:34
Here is a closeup of one bolt that jim sent On one he repaired
Here is a closeup of one bolt that jim sent On one he repaired
0 2020/05/08 16:06:39
0 2020/05/09 05:14:45
0 2020/05/09 05:14:57
0 2020/05/09 05:15:07
0 2020/05/09 05:19:50
See the crack
See the crack
0 2020/05/09 15:32:29
All new ones Jim overnighted all the parts!!! 200 inch pounds in shaf 180 on centrifugal
All new ones Jim overnighted all the parts!!! 200 inch pounds in shaf 180 on centrifugal
0 2020/05/09 15:32:36
This is the 13b
This is the 13b
0 2020/05/09 17:38:27
This is 703
This is 703
0 2020/05/09 17:38:32
Ok here you go Install diffuser Install seal retainer
Ok here you go Install diffuser Install seal retainer
0 2020/05/12 14:07:37
Install roller bearing Install three new crush seals
Install roller bearing Install three new crush seals
0 2020/05/12 14:07:45
Carefully install bearing retainer Pinch plate assembly Take note on oil feed and return oil Holes match up Gently tighten the two flathead Screws
Carefully install bearing retainer Pinch plate assembly Take note on oil feed and return oil Holes match up Gently tighten the two flathead Screws
0 2020/05/12 14:07:51
Install the cone and seal taking note On shims
Install the cone and seal taking note On shims
0 2020/05/12 14:07:59
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.