Offshoreonly.com
Anchor and winch finally in
Anchor and winch finally in
0 2020/06/15 20:50:18
0 2020/06/15 20:50:26
0 2020/06/15 20:50:33
Stainless steel trim around some areas. It’s an old pic, it’s already welded and half of it high polished
Stainless steel trim around some areas. It’s an old pic, it’s already welded and half of it high polished
0 2020/06/15 20:50:40
0 2020/06/15 20:50:48
0 2020/06/15 20:50:58
Added a post next to the helm, this was during fitting. It’s already welded and polished as well. There’s another post in the cabin directly underneath that this one bolts on to
Added a post next to the helm, this was during fitting. It’s already welded and polished as well. There’s another post in the cabin directly underneath that this one bolts on to
0 2020/06/15 20:51:05
Pattern done for the synthetic teak deck
Pattern done for the synthetic teak deck
0 2020/06/15 20:51:11
Plexi in most areas, some will have to get redone since it didn’t pass the hose water test :(
Plexi in most areas, some will have to get redone since it didn’t pass the hose water test :(
0 2020/06/15 20:51:17
0 2020/06/15 20:51:22
0 2020/06/15 20:51:26
Aluminium bar backrest done
Aluminium bar backrest done
0 2020/06/15 20:51:33
Aluminum plates to cover the reinforcement we did on the columns
Aluminum plates to cover the reinforcement we did on the columns
0 2020/06/15 20:51:40
Counter sunk screws and 3 layers of clear-coat with airbrush
Counter sunk screws and 3 layers of clear-coat with airbrush
0 2020/06/15 20:51:44
0 2020/06/15 20:51:47
0 2020/06/15 20:51:51
0 2020/06/15 20:51:55
0 2020/06/15 20:51:58
So one day I woke up worried that the carbon fiber columns were not going to be strong enough to support the top, so for better or for worse I added structural channels on either side of each column, as well as reinforcements were the columns meet the furniture.
So one day I woke up worried that the carbon fiber columns were not going to be strong enough to support the top, so for better or for worse I added structural channels on either side of each column, as well as reinforcements were the columns meet the furniture.
0 2020/06/15 21:07:08
0 2020/06/15 21:07:12
0 2020/06/15 21:07:16
0 2020/06/15 21:07:20
0 2020/06/15 21:07:26
0 2020/06/15 21:07:30
Plexus window with stainless plates. These have welded bolts on the back that get washer and nuts Inside the cabin
Plexus window with stainless plates. These have welded bolts on the back that get washer and nuts Inside the cabin
0 2020/06/15 21:07:33
Fitting
Fitting
0 2020/06/15 21:07:37
After we primed and painted them. Install complete, but getting 4 water leaks so, will have to remove and re caulk
After we primed and painted them. Install complete, but getting 4 water leaks so, will have to remove and re caulk
0 2020/06/15 21:07:40
Really wanted the most possible flush look . .
Really wanted the most possible flush look . .
0 2020/06/15 21:07:44
. . .
. . .
0 2020/06/15 21:07:48
First time I can take a photo from a distance . .
First time I can take a photo from a distance . .
0 2020/06/15 21:07:53
. . .
. . .
0 2020/06/15 21:08:00
. . .
. . .
0 2020/06/15 21:08:08
. .
. .
0 2020/06/15 21:08:15
Fitting backrest .
Fitting backrest .
0 2020/06/15 21:08:23
. . .
. . .
0 2020/06/15 21:08:31
Epoxy adhesive after cleaning of the back side of the team with acetone
Epoxy adhesive after cleaning of the back side of the team with acetone
0 2020/06/17 14:24:37
Covered it while it cures in case it rained overnight.
Covered it while it cures in case it rained overnight.
0 2020/06/17 14:24:43
Grill and sink area under the captains bench.
Grill and sink area under the captains bench.
0 2020/06/17 14:24:49
Will do table top epoxy and finish if the trim with polished stainless
Will do table top epoxy and finish if the trim with polished stainless
0 2020/06/17 14:24:58
0 2020/06/17 14:31:44
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.