Offshoreonly.com
The epoxy/e-glass cockpit part, extremely lightweight.
The epoxy/e-glass cockpit part, extremely lightweight.
0 2025/09/08 05:04:14
Original Ad for the boat, the original owner has told us that he would approach 125mph with light fuel.
Original Ad for the boat, the original owner has told us that he would approach 125mph with light fuel.
0 2025/09/08 04:39:15
The boat sitting in our customers yard with the old deck still on it.
The boat sitting in our customers yard with the old deck still on it.
0 2025/09/08 04:41:02
You can see the proportions of the boat. I really like the long flat bow.
You can see the proportions of the boat. I really like the long flat bow.
0 2025/10/16 05:20:25
Grinded the top of the fuel tank for where we laminate it in with epoxy.
Grinded the top of the fuel tank for where we laminate it in with epoxy.
0 2025/09/08 05:04:15
Sitting in our shop as we first received it.
Sitting in our shop as we first received it.
0 2025/09/08 04:41:03
0 2025/09/08 04:39:16
Added these supports to each front corner of the floor with laminate and foam.
Added these supports to each front corner of the floor with laminate and foam.
0 2025/10/16 05:20:26
Laminating the hull to the deck with epoxy.
Laminating the hull to the deck with epoxy.
0 2025/10/16 05:20:26
Those purple triple drives sure do look great.
Those purple triple drives sure do look great.
0 2025/09/08 04:39:17
We secured the tank with epoxy and fiberglass as well as through bolted it to the front bulkhead.
We secured the tank with epoxy and fiberglass as well as through bolted it to the front bulkhead.
0 2025/09/08 05:04:16
Seriously stout transom, the outer layer is a solid inch of kevlar and carbon.
Seriously stout transom, the outer layer is a solid inch of kevlar and carbon.
0 2025/09/08 04:41:04
You can see the triple engine compartment layout.
You can see the triple engine compartment layout.
0 2025/09/08 04:39:17
From the mid point of the hull forward there is no core in the hull sides and it is solid kevlar and carbon.
From the mid point of the hull forward there is no core in the hull sides and it is solid kevlar and carbon.
0 2025/09/08 04:41:05
The outside edge of the hull will be routered to have a radius and glass lamination added before final finish work.
The outside edge of the hull will be routered to have a radius and glass lamination added before final finish work.
0 2025/10/16 05:20:27
There is just enough space for walking up to the bow.
There is just enough space for walking up to the bow.
0 2025/10/16 05:20:28
The Comanche hulls were built for full performance so no cabins here.
The Comanche hulls were built for full performance so no cabins here.
0 2025/09/08 04:40:05
0 2025/09/08 04:40:07
0 2025/09/08 04:40:08
0 2025/09/08 04:40:08
Transom knees, the hull cut down a foot, the outboard bracket, and the center fuel tank, was work done by Apache about ten years ago
Transom knees, the hull cut down a foot, the outboard bracket, and the center fuel tank, was work done by Apache about ten years ago
0 2025/09/08 04:40:06
0 2025/09/08 04:40:07
The boat at our customers lot.
The boat at our customers lot.
0 2025/09/08 04:41:00
Large center fuel tank and the old saddle side tanks cut out. The area to the front half of the tank where all the structural support is on the hull sides is where the original cockpit was. the area behind the saddle tanks is where the third motor was mounted.
Large center fuel tank and the old saddle side tanks cut out. The area to the front half of the tank where all the structural support is on the hull sides is where the original cockpit was. the area behind the saddle tanks is where the third motor was mounted.
0 2025/09/08 05:04:08
Extra structure support in the passengers compartment.
Extra structure support in the passengers compartment.
0 2025/09/08 05:04:08
Old saddle tank.
Old saddle tank.
0 2025/09/08 05:04:09
Stringers in the transom area are original but the knees that tie them to the top of the transom and the bulkhead splitting the compartment in half are not original.
Stringers in the transom area are original but the knees that tie them to the top of the transom and the bulkhead splitting the compartment in half are not original.
0 2025/09/08 05:04:09
We cut the transom down to be even with the hull side.
We cut the transom down to be even with the hull side.
0 2025/09/08 05:04:11
Chunk of transom.
Chunk of transom.
0 2025/09/08 05:04:11
The skin coat on the cockpit part being made for this boat.
The skin coat on the cockpit part being made for this boat.
0 2025/09/08 05:04:12
We added two 3 inch rig tubes and used 2lb pour foam then a layer of thin chop mat to seal off these unused compartments.
We added two 3 inch rig tubes and used 2lb pour foam then a layer of thin chop mat to seal off these unused compartments.
0 2025/09/08 05:04:13
0 2025/10/16 05:19:18
0 2025/10/16 05:19:20
0 2025/10/16 05:19:21
0 2025/10/16 05:19:22
0 2025/10/16 05:19:23
0 2025/10/16 05:19:24
0 2025/10/16 05:19:25
The finish work for the cockpit is starting to fix the seam and fix the flat panels we added to the sides from removing the storage boxes.
The finish work for the cockpit is starting to fix the seam and fix the flat panels we added to the sides from removing the storage boxes.
0 2025/10/16 05:20:23
The extended cockpit ready for 6 bucket seats.
The extended cockpit ready for 6 bucket seats.
0 2025/10/16 05:20:24
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.