Offshoreonly.com
0 2018/05/03 17:14:58
0 2018/05/03 17:15:15
0 2018/05/03 17:15:27
0 2018/05/03 17:15:46
0 2018/05/03 17:16:02
0 2018/05/07 14:11:32
0 2018/05/07 14:11:58
0 2018/05/09 04:27:10
0 2018/05/09 04:28:07
0 2018/05/09 04:28:43
0 2018/05/09 04:31:26
0 2018/06/03 11:27:27
0 2018/06/03 11:29:39
0 2018/06/03 11:31:17
0 2018/06/03 11:32:10
0 2018/06/04 04:24:29
My 89 242. All original except stereo and engine. It will stay that way. I refuse to "modernize" the classic lines and upholstery of it. If i wanted a new one i would have bought one. The 80's era for formula was the best in my eyes. Goodluck on your project. Im sure it will be very nice when your done.
My 89 242. All original except stereo and engine. It will stay that way. I refuse to "modernize" the classic lines and upholstery of it. If i wanted a new one i would have bought one. The 80's era for formula was the best in my eyes. Goodluck on your project. Im sure it will be very nice when your done.
0 2018/07/19 05:29:26
The engine they came off of last night.
The engine they came off of last night.
0 2018/07/19 05:49:19
Got them off.
Got them off.
0 2018/07/19 05:50:00
Dry to the tip. No risk of reversion anymore. Regardless of how low i idle.
Dry to the tip. No risk of reversion anymore. Regardless of how low i idle.
0 2018/07/19 05:50:15
I have no clue how you would do twin small blocks. About need a shoe horn to get this in and out.
I have no clue how you would do twin small blocks. About need a shoe horn to get this in and out.
0 2018/07/20 05:33:54
Brand new 20 year old spare finally getting used for something.
Brand new 20 year old spare finally getting used for something.
0 2018/07/20 05:34:16
0 2018/07/20 07:18:02
0 2018/08/31 07:47:27
0 2018/09/01 06:41:24
0 2018/09/18 18:00:37
0 2018/10/13 17:18:44
Drilled to match so it wont take hours to drain oil.
Drilled to match so it wont take hours to drain oil.
0 2018/11/08 10:45:59
Found that with nothing more than re tapping the hole this fitting worked just fine. Put plenty of rtv on the threads, under the washer, and on the inside.
Found that with nothing more than re tapping the hole this fitting worked just fine. Put plenty of rtv on the threads, under the washer, and on the inside.
0 2018/11/08 10:47:29
Before drilling.
Before drilling.
0 2018/11/08 10:47:31
0 2019/01/03 06:17:12
0 2019/01/03 06:19:13
0 2019/01/14 09:07:54
0 2019/01/14 09:08:07
0 2019/04/12 16:32:20
0 2019/07/06 07:21:26
0 2019/07/06 07:22:00
 
 
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.