Offshoreonly.com
Color reminds me
Color reminds me
0 2023/01/06 16:02:39
Carbon
Carbon
0 2023/01/06 16:02:33
0 2023/01/06 16:02:28
0 2023/01/04 16:03:45
0 2023/01/04 16:03:40
Seams look pretty good hopefully 1/8 inch pinstripes will cover
Seams look pretty good hopefully 1/8 inch pinstripes will cover
0 2023/01/04 16:03:36
0 2023/01/04 16:03:31
0 2023/01/04 16:03:26
Both wrapped pretty straight and tight
Both wrapped pretty straight and tight
0 2023/01/04 16:03:21
0 2023/01/04 16:03:17
0 2023/01/04 16:03:10
0 2023/01/04 16:03:06
0 2023/01/04 16:03:02
0 2023/01/04 16:02:56
0 2023/01/04 16:02:51
Seam on both ended up on the edge of the bevel instead of the middle like i want. Bevel is there so i can follow it with a finger
Seam on both ended up on the edge of the bevel instead of the middle like i want. Bevel is there so i can follow it with a finger
0 2023/01/04 16:02:46
See the fog, at least spraying layed it down nice but it wouldnt sand out. I suck at sanding.
See the fog, at least spraying layed it down nice but it wouldnt sand out. I suck at sanding.
0 2023/01/03 08:42:14
When mine get skinned, gonna use the vinyl ester
When mine get skinned, gonna use the vinyl ester
0 2023/01/03 08:00:42
Theres this fog that i think is the surfacing wax which i was told it needed, a few pages back the silmar 249 was sprayed on the orange/black seat w/ the celtic cross and it had the same fog, thought at the time it was a dirty compressor.
Theres this fog that i think is the surfacing wax which i was told it needed, a few pages back the silmar 249 was sprayed on the orange/black seat w/ the celtic cross and it had the same fog, thought at the time it was a dirty compressor.
0 2023/01/03 08:00:37
0 2023/01/03 08:00:32
It has a 5 minute pot life, super thin, and only the youtube stars apply it perfectly flat and smooth like a mirror.
It has a 5 minute pot life, super thin, and only the youtube stars apply it perfectly flat and smooth like a mirror.
0 2023/01/03 08:00:28
I was told this resin is the way to but my opinion theres gotta be a better option. Silmar 249 surfboard resin, dries clear and is uv but only the youtube stars can sand it with high grits to polish.
I was told this resin is the way to but my opinion theres gotta be a better option. Silmar 249 surfboard resin, dries clear and is uv but only the youtube stars can sand it with high grits to polish.
0 2023/01/03 08:00:23
Don't mask off thinking it will make less mess, it only screws up the nice cut line you started with. Sorry buddy, your seats gonna have a little wider pinstripe back there.
Don't mask off thinking it will make less mess, it only screws up the nice cut line you started with. Sorry buddy, your seats gonna have a little wider pinstripe back there.
0 2023/01/03 08:00:18
Instead, pull the tape and just go for it, less mess with near perfect seam.
Instead, pull the tape and just go for it, less mess with near perfect seam.
0 2023/01/03 08:00:13
Seams between the 2 pieces get pinstripes outta thickened and tinted resin
Seams between the 2 pieces get pinstripes outta thickened and tinted resin
0 2023/01/03 08:00:09
Heres the cut/seam in better light.
Heres the cut/seam in better light.
0 2023/01/03 08:00:04
Take it outside to spray the glue and mask the cut line so the material doesnt stick past the tape for a cleaner cut.
Take it outside to spray the glue and mask the cut line so the material doesnt stick past the tape for a cleaner cut.
0 2023/01/03 07:59:59
Dont use spray glue in the house, even a light dusting goes all over !
Dont use spray glue in the house, even a light dusting goes all over !
0 2023/01/03 07:59:54
4 layers of 1/4 fine line to get the cut line /seam. No way to skin these in 1 piece without 2 helpers who have long enough attention span to hold and not wrjnkel the material
4 layers of 1/4 fine line to get the cut line /seam. No way to skin these in 1 piece without 2 helpers who have long enough attention span to hold and not wrjnkel the material
0 2023/01/03 07:59:49
A round of filler tinted black ans some 80 grit
A round of filler tinted black ans some 80 grit
0 2023/01/03 07:59:42
0 2022/12/31 12:29:21
0 2022/12/31 12:29:16
0 2022/12/31 12:29:11
0 2022/12/31 12:29:07
0 2022/12/31 12:29:03
0 2022/12/31 12:28:58
0 2022/12/30 05:55:19
0 2022/12/30 05:55:14
0 2022/12/30 05:55:09
0 2022/12/23 15:55:04
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.