How to disconnect an trim pump from an outdirve under pressure
#1
Registered
Thread Starter
How to disconnect an trim pump from an outdirve under pressure
I want to know how to disconnect a trim pump under pressure from an outdrive that is stuck in the half way out position. I imagine it will be under alot of pressure from the drive and as soon as I loosen the line the fluid will squirt all over the place. Please advise.
Last edited by gripit; 02-17-2010 at 08:40 AM.
#2
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: How to disconnect an trim pump from an outdirve under pressure
i loosened the line where it comes out of the ram, i unweighted the drive to undo the last few threads and then put the line in a bucket to catch the oil.
#3
Registered
Thread Starter
Re: How to disconnect an trim pump from an outdirve under pressure
Is there any pressure releif values on this style pump? Also, I really do not have access to the ram because the boat is on a lift. Any tips to do this by undoing the hydrolic lines from the pump in the engine compartment?