Leathl_WS6

Any Idea what these fit or what they are worth?


http://home.comcast.net/~leathl_ws6/DCP_2159.JPG
http://home.comcast.net/~leathl_ws6/DCP_2160.JPG
http://home.comcast.net/~leathl_ws6/DCP_2161.JPG

One is a Mirage 15p 48-19838-15 I'm not sure what it fits. Alpha or TRS I think.

The other 2 are a set one RH and one LH. They are 16 1/2 X 24 L and 16 1/2 X 24 R.

All of them are in good shape with just a few minor dings.

Thanks Rob

Cord

iTrader: (2)

Well, I highly doubt that you'll be wanting the cleaver. Assuming the Mirage has the flo-torque hub, it'll fit just about anything. It's worth around $150, maybe a bit more if it's in really good shape.

Leathl_WS6

Thanks Cord!

These are mine, I want to get rid of them. I don't know what the cleavers will fit or what they are worth.

Rob

Cord

iTrader: (2)

If you don't know, then about $15 is all they'll bring on ebay. If you can figure it out, the price depends on the application. I've seen them go from $100 on up.

HOUSTONPROP

The Mirage prop is not a plus nor can it be converted to the flo-torque style the inner hub barrel is round and it a low pitch prop for a heavy cruiser single drive probably.

E- BAY THE MIRAGE or I will gladly give you 75.00 for it and you ship it to me .

the others look like old speedmaster props,measure the spline depth and count the splines and then list them on scream and fly .com. or there should be small numbers on the side of the hub barrel and then we can find out just what they are. 48-???????24 But buy looking at them Know they are made by MERCURY/Keikehaifer the problem is that they are surface piercing props and out dated,from size and pitch (too small)

good Luck. or give you 150.00 credit towards prop repairs in the future.Darin

Leathl_WS6

Thanks Darrin. I'll get that info tonight when I get home and post it.