Originally Posted by Quinlan
(Post 2938777)
What he said. My new motors are on the dino as we speak. First trip out in 2+ months. Picking it up on da way there.
Cant wait!! Now about that NOISE law. Damnit man |
They just raced, but never announced a winner. It looked like the MTI won out at the end, but its hard to tell with camera angles .
|
- Bob Bull CMS 2008 MTI 168 mph new leader above Dave Scott 163mph who had trouble with one engine
-They mentioned that Mr. Pyburn ran outside the trap -Gary Smith 154mph AZ Skater 40ss 2nd Drag race goes to MTI again Looks like Mr. Pyburn is waiting to get another run in |
Originally Posted by GLH
(Post 2942307)
- Bob Bull CMS 2008 MTI 168 mph new leader above Dave Scott 163mph who had trouble with one engine
-They mentioned that Mr. Pyburn ran outside the trap -Gary Smith 154mph AZ Skater 386 |
Did they just say that the mercedes boat ran 132?
|
Originally Posted by jryan26
(Post 2942338)
Did they just say that the mercedes boat ran 132?
|
2-0 Mti
|
Gino 152 now
|
The first run was scary. We had the Starboard motor cut out for a second at about 140. Some very serious hooking! I would like to see the video of that run. We have some burnt wires and the one motor was down 1000 RPMS the 2nd. Now that we found the problem we wil hopefully do much better tomorrow. Never fails. Months of prep. Motors just got completely redone at Sterling. Test, test and test! 15 seconds into the first run a short shows up at the abslolute worst time. That Murphys law is a biotch!
|
Great show Gino.
Sundays gonna rock |
All times are GMT -5. The time now is 07:56 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.