Need Drive Help
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Toledo Oh
Posts: 1,915
Likes: 0
Received 0 Likes
on
0 Posts
Need Drive Help
I might have a problem with one of my drives. When I put it in gear one shifter dosn't go as far forward as the other two, and it's hard to pull out of gear. Any ideas anyone?
#3
Guest
Posts: n/a
could be upper gear set, where the clutch cone is at. you would have to drain the oil out of drive, look for any brass or metal shavings, if you see some, pull the rear cover off and look inside you will see a brass ring thats supposed to be pressed on both gears, if one of them has come unseated, thats your problem, and the gear set will have to be replaced. i've done plenty of them, so if i can be of any help give me a call 616-208-4424.
dave
dave
#4
Charter Member #94
Charter Member
2 bravos with one stone
I was having the same problem with one of my drives. Checked the cables, (yes, both of them),removed the rear cover but didn't see anything major jump out and grab me.
After reading Dr. Dave's post, I think I'll go back and look again.
Thanks
After reading Dr. Dave's post, I think I'll go back and look again.
Thanks
__________________
Abby-someone
Abby-someone
Thread
Thread Starter
Forum
Replies
Last Post
Canada Jeff
Drives and Lower Units
10
07-19-2007 02:38 PM
thayes11
General Q & A
0
10-02-2005 12:36 PM
Velocity Tom
General Boating Discussion
4
07-16-2003 10:13 AM
panteraracin
General Q & A
3
02-07-2002 10:36 PM