Hydromotive or mercury maximus
#1
Registered
Thread Starter
Join Date: Jan 2004
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hydromotive or mercury maximus
does anyone have any input on Hydromotives new 5 and 6 blades as compared to mercurys new 5 blade maximus? I have a high x-diminsion set up and currently run a labbed bravo one with 1.36 gears with IMCOs new 4x4 which includes a standoff box, with 2" shorter lower. do you step down a pitch with the 5 or 6 blades as compared to the Bravo one.? thanks
#2
Registered
iTrader: (4)
Hey Budge,
are you guys thawed out up there yet?
I have heard that the Hydros are finished off nicer than the Maximus at this point. Also, you can get the Hydro in a bow lifting (P5-X) or stern lifting version (P5-Plus?) and in one inch increments.
I just ordered a 27 P5-X that I;m hoping to spin pretty hard (not as hard as you though )
Call and talk with Matt or Julie at Throttle Up. They will work with you to the end
Dave
are you guys thawed out up there yet?
I have heard that the Hydros are finished off nicer than the Maximus at this point. Also, you can get the Hydro in a bow lifting (P5-X) or stern lifting version (P5-Plus?) and in one inch increments.
I just ordered a 27 P5-X that I;m hoping to spin pretty hard (not as hard as you though )
Call and talk with Matt or Julie at Throttle Up. They will work with you to the end
Dave