MSD is working
#1
Registered
Thread Starter
Join Date: May 2004
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
MSD is working
Stepped up 350 vortec ported and 4bbl roch
I finally got this MSD to work after replacing the box. It now runs well but advanced timing difficult with my light as it seems to bounce around a bit. Throttle response nice. Tbolt V just as good however. I wish I would have known this before I purchased a nonrefundable electronic product.
Suggestions on springs and bushing - currently 2 light blue springs and black bushing. Engine run at 5280 feet above sea level.
I finally got this MSD to work after replacing the box. It now runs well but advanced timing difficult with my light as it seems to bounce around a bit. Throttle response nice. Tbolt V just as good however. I wish I would have known this before I purchased a nonrefundable electronic product.
Suggestions on springs and bushing - currently 2 light blue springs and black bushing. Engine run at 5280 feet above sea level.