Hull bottom material
#1
Registered
Thread Starter
Hull bottom material
Does anyone know what the hull bottom is made of as far a coring goes? I'm thinking about putting in a depth sounder and I was going to have the transducer read thru the hull. Do I need to core the hull, or can I glue it right down? Also how thick is it? I was going to screw down a 2nd bilge pump right to the bottom.
Thanks for any input,
Frank
Thanks for any input,
Frank
#2
Registered
Join Date: Dec 2000
Location: Cudjoe Key, FL USA
Posts: 961
Likes: 0
Received 0 Likes
on
0 Posts
I have a depth sounder tied into my Garmin chartplotter that reads through the bottom without cutting anything and it works great. You just have to make sure it is filled with oil.
#3
Registered
Thread Starter
Thanks Jromy! In noticed your from Boca Raton. Do you know anything about a 33 that used to be there called "Palm Breeze Express" It was from a charter company called "Air and Sea" I think.
Thanks,
Frank
Thanks,
Frank
#4
Registered