Winter Project
#131
Charter Member
Charter Member
Thread Starter
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
#133
chuckbeecher
Platinum Member
Join Date: Jun 2001
Location: Anywhere from the Laguna Madre to JAX and beyond
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
#135
Charter Member
Charter Member
Thread Starter
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
Both motors in the boat now. Outdrive alignment is good. Now we'll get busy with the details.
__________________
Long time cult member.
Long time cult member.
#136
Charter Member
Charter Member
Thread Starter
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
#137
Charter Member
Charter Member
Thread Starter
Join Date: Nov 2000
Location: Lake Charles, LA USA
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
#138
Registered
iTrader: (1)
Hope it is okay to post my project on here, I still feel like I am AT family
update...WESCO square decked the blocks and added somes screens to the lifter valleys, (they were untouched by the previous builder) and I didn't want the Merlin III heads to go back on the engines without having some port work and mods done by "JimV"...full exhaust port, some chamber/unshrouding work and some special intake runner, bowl, and short side radius work done plus we went from a 2.30" intake valve to a 2.35" and we decreased the exhaust valve size from a 1.90" to a 1.88" and WESCO also surfaced the heads....
Last edited by KAAMA; 03-22-2010 at 12:19 AM.
#139
VIP Member
VIP Member
As soon as the tunnel ram gets back from getting ceramic coated this will be ready to drop back in the Jetboat. New 10 qt. pan with floating baffles and gold irridium finish from Tom at Jetboat Performance in California. Tom is the man on these old Jetboats