|
Originally Posted by Wildman_grafix
(Post 4104300)
Were you correct on the twin OB's?
After seeing the 33 with them a 29 with a couple 300's would be a cool boat. I dunno. We'll have to consult with mike-b@d-spellering first. We need to fit his consultation into the calendar with Harry and Bobby. |
We will offer it with twin OBs. That is a reasonable rig with virtually no weigh gain.
|
Originally Posted by ActiveThunder
(Post 4104161)
Totally incorrect. The Sonic was a renamed Coyote. The 37 AT originally shared a similar bottom to the Scorpion which was popped from a Cig. I only kept the basic V shape and totally redesigned the chines and lifting strakes as well as the nose. The hull we bought was a rock solid platform to use as a foundation to build off of. Then we introduced the DDC patented step-design on 1999.
For the record we are building the 29 hull mold with the step. If you want a non-step single engine V-bottom in the 28-29 foot range you are back at Pantera I guess....:bestwishes: Ummm...I don't think anybody would want to give Pantera any $$$ up front to build a boat after everything that has taken place. This guy should just except the "step" to life and buy the Active Thunder!! |
I guess I still think this way and someone has changed there thinking . and I get all the grief
"""" Plus, honestly, the 28 runs so great as is there is not a real desire to mess with it! At 75 mph it is on 'rails'. With a step and 80+ it is a guess. Hope this helps. Pat """"" |
If it helps at all Mike, and I can't believe I am saying this but....................
I would prefer a non step myself but really that's just cause I am a old phuck that don't know any better. With that said I would take a 33/37 with a step if I could justify it these days but I can't so for me a good ole 32 is in my future. I hope......... |
If I were to have a 29 built I would want no composite and all wood construction, used TRS drive, carbed engine and of course a non-stepped hull. I guess I'm just old school.
|
Originally Posted by onesickpantera
(Post 4104671)
If I were to have a 29 built I would want no composite and all wood construction, used TRS drive, carbed engine and of course a non-stepped hull. I guess I'm just old school.
|
Coupled to an OMC Cobra outdrive?
Originally Posted by Sydwayz
(Post 4104863)
Why not a pair of old teal blue Crusaders and shaft drives?
|
Originally Posted by ActiveThunder
(Post 4104939)
Coupled to an OMC Cobra outdrive?
Can you think of a boat builder expert right there in Fort Lauderdale to consult? :drink: :party-smiley-004: :drink: |
Originally Posted by ActiveThunder
(Post 4104939)
Coupled to an OMC Cobra outdrive?
|
| All times are GMT -5. The time now is 07:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.