Prop & boat pairing - tomorrow's the day to see how we did
09-06-2016 | 10:28 AM
#31
Thread Starter
Registered
Joined: Jul 2011
Posts: 410
Likes: 0
From: Long Lake, MN
LOL
I searched hard for the right avatar, I chose it knowing what I was getting myself into and that there would be times like this :-)
Sometimes I just wish I was the AT skank vs. the owner...life would be so much easier :-)
Go-fast related activities are a learning opportunity is several ways, including patience, frustration/temper control. :-)
I searched hard for the right avatar, I chose it knowing what I was getting myself into and that there would be times like this :-)
Sometimes I just wish I was the AT skank vs. the owner...life would be so much easier :-)
Go-fast related activities are a learning opportunity is several ways, including patience, frustration/temper control. :-)
09-08-2016 | 09:26 PM
#33
Neno the mind boggler
Joined: Sep 2001
Posts: 13,080
Likes: 320
From: toledo oh
pulling it = well . . . . pulling it
. . . . . Then I need to squeeze around the side of the engine compartment with a gopro to get some pictures of the coupling. I guess I should be looking for metal shavings, if so, i'll get out some magnets too. Anything else to look for? I guess if it is the coupling and the engine needs to come out i'll have a better chance to look at the transom....always looking for the silver lining :-)
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
