Go Back  Offshoreonly.com > Owners Forum > Active Thunder
Pat, need a direction on a couple things. >

Pat, need a direction on a couple things.

Notices

Pat, need a direction on a couple things.

Thread Tools
 
Old 10-15-2004 | 06:47 PM
  #1  
Sydwayz's Avatar
Thread Starter
Forum Regulator
20 Year Member
Super Moderators
VIP Member
 
Joined: May 2001
Posts: 24,210
Likes: 1,604
From: Worldwide
Default Pat, need a direction on a couple things.

Pat,
First, I need two identical drain plugs as you have on mine and Rich's boat, the chrome plugs with chrome fittings. I am going to install them behind the step. Who makes them? Do you have any in stock?

Second, I broke one of my switches on the dash. I need a replacement. Who makes them? Do you have any in stock?

Third, I am adding a whomping stereo to the boat, and I need want to replicate the little 5 ckt breaker under the rear seat for amps and such. Do you have these in stock in different Amp ratings? If not, who makes them?

I have checkbook in hand and a stamped envelop ready to go. Please let me know. I think I am getting straight with the Water Actuator Valve. There are two in the country, and I think one has my name on it already. At least I hope.
Sydwayz is offline  
Reply
Old 10-16-2004 | 07:07 PM
  #2  
ActiveThunder's Avatar
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,528
Likes: 10
From: Pompano Beach, Florida
Default Re: Pat, need a direction on a couple things.

Brian, I'm making a note. We have the plugs and switches on the shelf. What/where is the breaker? Describe it a little.

Thanks, Pat.
ActiveThunder is offline  
Reply
Old 10-16-2004 | 08:04 PM
  #3  
Sydwayz's Avatar
Thread Starter
Forum Regulator
20 Year Member
Super Moderators
VIP Member
 
Joined: May 2001
Posts: 24,210
Likes: 1,604
From: Worldwide
Default Re: Pat, need a direction on a couple things.

There is a circuit breaker under the rear seat on the forward wall of the compartment, with 5 circuits, one for each of the 4 fluid pumps, and one for the hatch ram, (if memory serves). I am going to replicate this setup for my 4 amplifiers, so the exact same piece would work, as long as I can come up with the right circuit breaker amperages. Two CBs need to be 75A. Two CBs need to be 105A. One CB would be empty. Thanks for the quick response.

I broke one of the dash switches while trouble shooting behind the dash one day. I need to replace that one, (which I rotated to the Mufflers slot), since I don't have Mufflers. I am going to use that switch for the Neon lights.

Last edited by Sydwayz; 10-16-2004 at 08:07 PM.
Sydwayz is offline  
Reply
Old 10-17-2004 | 08:56 AM
  #4  
excursion's Avatar
Registered
 
Joined: Mar 2002
Posts: 2,276
Likes: 1
From: Richmond Va
Default Re: Pat, need a direction on a couple things.

Pat ,
This is James in Va. and I also need to get one of the white switchs on the dash, I need the hatch switch,( momentary/off/momentary ) Tell me how much and I will get you a check out, with my address.
And I also need the the old style AT logo that went up on the side of the boat above the foot step at the front bolsters, I have the correct color of vinyl, can I ship it to you and your guy cut them out on send back, the edges are starting to peel a little.

Thanks
James
804-539-3114
excursion is offline  
Reply
Old 10-18-2004 | 10:31 AM
  #5  
excursion's Avatar
Registered
 
Joined: Mar 2002
Posts: 2,276
Likes: 1
From: Richmond Va
Default Re: Pat, need a direction on a couple things.

Ttt
excursion is offline  
Reply
Old 10-21-2004 | 08:11 PM
  #6  
Sydwayz's Avatar
Thread Starter
Forum Regulator
20 Year Member
Super Moderators
VIP Member
 
Joined: May 2001
Posts: 24,210
Likes: 1,604
From: Worldwide
Default Re: Pat, need a direction on a couple things.

Pat, TTT please! I responded about the CBs!
Sydwayz is offline  
Reply
Old 10-23-2004 | 07:20 AM
  #7  
ActiveThunder's Avatar
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 3,528
Likes: 10
From: Pompano Beach, Florida
Default Re: Pat, need a direction on a couple things.

Brian,

We buy them from Pacer Marine which is 954-462-0902. We buy as we go so we don't stock them. The part number is EL1-1-"70" or whatever amperage you require. The highest I see listed is 100. They also sell the blank panels.

Hope that helps, Pat.
ActiveThunder is offline  
Reply
Old 10-25-2004 | 07:53 AM
  #8  
excursion's Avatar
Registered
 
Joined: Mar 2002
Posts: 2,276
Likes: 1
From: Richmond Va
Default Re: Pat, need a direction on a couple things.

Hey Pat!! what about the switch's and the vinyl lettering I needed? Is it possible to still get these?

Thanks James
excursion is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JJONES
Prop Talk
7
04-18-2006 07:13 PM
epeek
Fountain
22
01-22-2005 11:10 AM
flylevel
General Boating Discussion
1
04-03-2003 11:55 AM
MIKEHTMSR24
General Q & A
3
03-23-2003 08:48 PM
HOTROD2
General Q & A
20
02-10-2003 07:13 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.