Need help Pat!!!!
03-15-2005 | 11:39 PM
#1
Thread Starter
Registered
Joined: Apr 2003
Posts: 577
Likes: 0
From: Janesville,Wi
Need help Pat!!!!
Pat I took the bolsters out of the 96 32 active thunder I want to replace the screws that hold them in can I go alittle longer on them or is there something underneath them??
Jason
Jason
03-16-2005 | 02:11 AM
#2
Charter Member # 55
Joined: Oct 2000
Posts: 20,232
Likes: 2,482
From: Omaha/LOTO
Re: Need help Pat!!!!
Try putting a piece of wire down the holes and see how far it goes. Might have fuel tank below the mounts nearest the center of the boat. Longer won't really do much if the floor is an inch thick.
You may also have a boat built prior to Pat owning AT.
You may also have a boat built prior to Pat owning AT.
03-16-2005 | 05:59 AM
#3
Registered
Joined: Jan 2005
Posts: 97
Likes: 0
Re: Need help Pat!!!!
Jason,
Griff is correct. The tanks are just below the floor proabably less than an inch. The coat hanger probe is a good idea. We currently have an aluminum plate we attach under the floor. If your pirelli is still out you might explore this option as well.
Pat.
Griff is correct. The tanks are just below the floor proabably less than an inch. The coat hanger probe is a good idea. We currently have an aluminum plate we attach under the floor. If your pirelli is still out you might explore this option as well.
Pat.
03-16-2005 | 06:28 PM
#6
Registered
Joined: Oct 2000
Posts: 1,299
Likes: 0
From: New York, NY - Manhattan BABY!
Re: Need help Pat!!!!
Originally Posted by ATPatrick
Miller, I will have another new one tomorrow night. stay tuned.
miller
