Ok, so what gives? 42' Comanche
#12
Registered

Joined: Mar 2002
Posts: 2,765
Likes: 10
Originally Posted by Nykamp
It would be more than 700 for a new 42 triple.
i was told mine was around 950k new in 1994....so i imagine that they would be every bit of that now with trips
#13
Originally Posted by bryanspeedracer
For what it's worth, I really like the Comanchees. There is no way I'll afford a triple engine boat, but a 36 that's a different story...
Out of curiosity, how many and what size Comanchees were built?
Bryan
Out of curiosity, how many and what size Comanchees were built?
Bryan
Last edited by Comanche3Six; 08-29-2007 at 10:43 AM.
#16
Registered
Joined: Feb 2003
Posts: 3,660
Likes: 0
From: Jupiter, Fl
That boat is John Arrudas personal boat. He never really used it commercially because Turbine Marine took off so well.
It was sold to a guy who was going to repower it with turbines.
Subsequently, the deal fell through and we already had the motors sold.
The boat has been meticulously maintained like everything John has. If you've seen his shop you'd know.
Now he is parting it out. He is way too busy with racing and buliding turbines to use it.
The drives are available as well.
Paradigm powerboats is now the brokerage arm of Turbine Marine
It was sold to a guy who was going to repower it with turbines.
Subsequently, the deal fell through and we already had the motors sold.
The boat has been meticulously maintained like everything John has. If you've seen his shop you'd know.
Now he is parting it out. He is way too busy with racing and buliding turbines to use it.
The drives are available as well.
Paradigm powerboats is now the brokerage arm of Turbine Marine
#17
Here are the real story on the boat or close to anyway: The boat was a charterboat in Florida for a few years until a guy from Sweden bought it and had it flown on a plane to Stockholm Sweden. He used it for I belive 2 seasons and traded it in on a 50 foot Nortech cat with 4 engines. The boat had 850-900 KE engines that was ready for freshning. As per my information he was dissapointet in the boats performance.
Cigaretteman
Cigaretteman
#19
Originally Posted by bryanspeedracer
Are these hulls the same hull mold that McManus is using for the Apache line?
I really like that 36 of yours, Comanche3six...
Bryan
I really like that 36 of yours, Comanche3six...
Bryan



