![]() |
apache 28 info
always hearing about these boats.... are they that good in rough water? is it because of their weight or why are they that good? and how come it seems everyone says their expensive to mantain.... are'nt all boats? just curious, and have been looking at them.... i have a 260 velocity and was curious about the difference in ride...
thanks :drink: |
Yes, they're everything you've heard they are. The 28 isn't all that different to maintain than any larger offshore boat. The big one's take TONS of power and that's hard on parts. You also don't see them rigged with mid-range parts so when you redo one or repair it, you're buying top of the line. There's absolutely no comparison between the Velocity and the Apacjhe. I had a 30 Velocity raceboat and I can tell you there's no way it would hang with the 28 in anything over 4's and 5's. The 28 Apache isn't light and it's got a very long bottom- it rides and mashes water as well as most 35's.
|
on a 41' i can see that but even with the 28's? i see they weigh a solid 7,000 lbs...
|
It is not possible to compare 26 Vo, to a 28 Ap. Totaly different boats the Apache will crush the bigger water and the Velocity will be crushed, end of story.
|
Originally Posted by 007joe
(Post 2575466)
on a 41' i can see that but even with the 28's? i see they weigh a solid 7,000 lbs...
I've run the 28 at speed next to boats in the 35' range and gave away little if anything in sloppy water. There's little out there at 28' that'll keep up in the slop- Something like a Fountain 35? No contest. |
Originally Posted by 007joe
(Post 2574900)
always hearing about these boats.... are they that good in rough water? is it because of their weight or why are they that good? and how come it seems everyone says their expensive to mantain.... are'nt all boats? just curious, and have been looking at them.... i have a 260 velocity and was curious about the difference in ride...
thanks :drink: |
what motors in your yours tex?
i may be looking into one of these just dont know when and thanx for the info... |
Originally Posted by 007joe
(Post 2575466)
on a 41' i can see that but even with the 28's? i see they weigh a solid 7,000 lbs...
|
Originally Posted by el indio
(Post 2577275)
i have a 41 that weighs 8600 with fuel...fresh from the propnut to the waterpump....0 hours.........make me a fair offer.........m.m..
|
2 Attachment(s)
Originally Posted by 007joe
(Post 2577247)
what motors in your yours tex?
i may be looking into one of these just dont know when and thanx for the info... Engine compartment is bigger than 28AT and Pantera, or so it looks that way. Don't know the exact measurements. I'll post a pic when I get home. Give me a shout when your ready to buy. Kids and house are in my near future, so unless I get a big raise something may have to give. |
| All times are GMT -5. The time now is 08:45 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.