Would ASD's work on a 36' Apache?
#1
Thread Starter
Registered

Joined: Sep 2003
Posts: 1,867
Likes: 14
From: Here and There
I know some guys have messed around with their X dimensions on 36's. I remember hearing that shorties don't work so well but Frank had good results with his X adjustment. I have always thought the asd bravo conversion would be sweet. Then I got to looking at how deep my X is started thinking that a surface drive setup might adversely mess with handling.
I currently have a very mild setup but before I start changing stuff around I want to have a game plan so I don't go one direction and get into it and realize I needed to go a different direction.
Curious what u guys think.
Thanks,
Josh
I currently have a very mild setup but before I start changing stuff around I want to have a game plan so I don't go one direction and get into it and realize I needed to go a different direction.
Curious what u guys think.
Thanks,
Josh
#7
Thread Starter
Registered

Joined: Sep 2003
Posts: 1,867
Likes: 14
From: Here and There
I am thinking long term (I'm a planner). At the moment I am doing a top end refresh of current power but in 3 seasons or so I will have to do full rebuilds and figure I will go to 540's. My boat doesn't have external hydraulic steering so I will need to add that with the increased speed. Then, the Bravo's will obviously be the weak link.
So, once I spend 25-30k for B-maxes or imco's and then 6k for External Hydraulic steering and then the cost to find another 5-8mph out of the setup (which I figure asd will add over a bmax) plus a rooster tail (priceless) on a sidebyside setup I figure I am at the 50k or so for the asd's.
I just wish there was a used market to find them and I would get them sooner than later.
So, once I spend 25-30k for B-maxes or imco's and then 6k for External Hydraulic steering and then the cost to find another 5-8mph out of the setup (which I figure asd will add over a bmax) plus a rooster tail (priceless) on a sidebyside setup I figure I am at the 50k or so for the asd's.
I just wish there was a used market to find them and I would get them sooner than later.
#8
Thread Starter
Registered

Joined: Sep 2003
Posts: 1,867
Likes: 14
From: Here and There
#9
Registered

Joined: Jan 2007
Posts: 6,473
Likes: 357
From: Mansfield, TX
I see them pop up on craigslist sometimes.
#10
Thread Starter
Registered

Joined: Sep 2003
Posts: 1,867
Likes: 14
From: Here and There
Buy this project boat and pull the arneson's off http://cgi.ebay.com/ebaymotors/ws/eB...3984&viewitem=
I see them pop up on craigslist sometimes.
I see them pop up on craigslist sometimes.


