Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Baja (https://www.offshoreonly.com/forums/baja-31/)
-   -   Rebirth of a Baja (https://www.offshoreonly.com/forums/baja/199035-rebirth-baja.html)

crayolacrazy 03-26-2009 05:30 PM


Originally Posted by JasonSmith (Post 2829812)
I've put in a phone call to a guy I know. I'll call you when I know something about them. Should be tomorrow.

we have to get some for Doc and his better half Ill get some of all sizes to give away since it dont look like any Baja dealer or Baja sponsered poker runs .sounds good .

Smitty 03-26-2009 08:36 PM

Doc

I have my intercooler pickups in the same spot you do. You need to trim them up a little shorter. They appear to be to low which will cause drag and too much pressure. Mine are about 1/4 at the back and flush at the front. Remember as the water comes off the back of the boat, it curves upward and kinda rams it in. That is why those pickups need to be shortened.

I can measure exact if you need it. I would start there.

Let me know,

Smitty

XT-Innovator 03-27-2009 08:38 AM


Originally Posted by Smitty (Post 2830008)
Doc

I have my intercooler pickups in the same spot you do. You need to trim them up a little shorter. They appear to be to low which will cause drag and too much pressure. Mine are about 1/4 at the back and flush at the front. Remember as the water comes off the back of the boat, it curves upward and kinda rams it in. That is why those pickups need to be shortened.

I can measure exact if you need it. I would start there.

Let me know,

Smitty

We actually drilled the pick-up holes first, then installed them to mark the leading edge flush with the bottom of the hull. They were cut at 90 degrees to the pick-up tube, so the 15 degree angle of the transom provides the pick-up angle that measured close to 1/4" on the backside. The angle that the photo was taken looks like they are hanging low. Doc, you need some photos taken from a good profile angle to review.

The 36ol (15*) transom angle is more than most Bajas. In comparison the 33ol is 13 degrees.

XT

crayolacrazy 03-30-2009 09:50 PM


Originally Posted by JasonSmith (Post 2829812)
I've put in a phone call to a guy I know. I'll call you when I know something about them. Should be tomorrow.

call me about the shirts 4127810881

Dock Holiday 03-31-2009 11:23 AM

Alright I just got off the phone with Brett at BBlades and gave him an order for a new pair of labbed props.

I have heard many good things about Brett and I can believe they are all true. He really knows props and he really understands Baja's and what they need to work.

With the base line numbers I have on the new stock 32 pitch props he agrees that the 32 is where I need to stay. With labbing, extra 100 to 200 RPM and cup work he is confdent that his props will put me at 91 to 93 MPH. He also shared some trim technics to share which should help as well.

I just wish I had called him sooner as the turn around time right now is 3 weeks.

I'll keep you posted.

XT-Innovator 03-31-2009 12:35 PM


Originally Posted by Dock Holiday (Post 2833096)
Alright I just got off the phone with Brett at BBlades and gave him an order for a new pair of labbed props.

I have heard many good things about Brett and I can believe they are all true. He really knows props and he really understands Baja's and what they need to work.

With the base line numbers I have on the new stock 32 pitch props he agrees that the 32 is where I need to stay. With labbing, extra 100 to 200 RPM and cup work he is confdent that his props will put me at 91 to 93 MPH. He also shared some trim technics to share which should help as well.

I just wish I had called him sooner as the turn around time right now is 3 weeks.

I'll keep you posted.

I was right again!

Three weeks is just before a Poker Run in Fort Meyers FL?

XT:rolleyes:

Dock Holiday 03-31-2009 12:47 PM


Originally Posted by XT-Innovator (Post 2833136)
I was right again!

Three weeks is just before a Poker Run in Fort Meyers FL?

XT:rolleyes:

I don't think we will have them in time.

Dock Holiday 04-05-2009 05:31 PM

Sunday April 5, 2009

Lake Norman

73 Degrees, Partly Cloudly, 10-15 MPH Wind

Well the wife finally got to ride in the NEW Dock Holiday.

We have been extremely busy putting a poker run together for the local HOG Chapter and it was a huge success yesterday so we decided to make a trip to the lake today and just relax.

Sorry that we did not call anyone but it was only a three hour total round trip from the house to the lake and back home. I wanted to run the boat and I really wanted Tommie to ride in it. She wanted a nice quite lunch for just the two of us and all went very well.

The boat ran perfectly and the smile on her face as it accellerated from 75 to 85 is priceless. We never ran it WOT and are looking forward to receiving the new props from BBlades.

Dock Holiday 04-05-2009 05:34 PM

1 Attachment(s)
Tommie took just a few pictures of the instruments as we were running.

3400 RPM

50 MPH GPS

Still in vacumn

Dock Holiday 04-05-2009 05:38 PM

1 Attachment(s)
3800 RPM

57 MPH GPS

Still in vacumn


All times are GMT -5. The time now is 02:13 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.