![]() |
Didn't have to do anything...The tape is to keep the 4200 off the boxes when it squirts out.
|
U Puttimg In Sea Strainers
|
Originally Posted by TWIN-SPINS
(Post 3077991)
U Puttimg In Sea Strainers
|
Originally Posted by TWIN-SPINS
(Post 3077991)
U Puttimg In Sea Strainers
Originally Posted by Irishtornado
(Post 3078006)
Yes I am..
|
Originally Posted by JasonSmith
(Post 3078008)
WHERE??? I can't even fart in my bilge it's so tight.
Is a 29OL tighter in the engine compartment? |
Better make sure you can get the sea water pumps off with them there.
I was going to put mine there too, but found out I couldn't get to the pumps without taking the strainers out 1st. |
Originally Posted by JasonSmith
(Post 3078023)
Better make sure you can get the sea water pumps off with them there.
I was going to put mine there too, but found out I couldn't get to the pumps without taking the strainers out 1st. |
Originally Posted by JasonSmith
(Post 3078023)
Better make sure you can get the sea water pumps off with them there.
I was going to put mine there too, but found out I couldn't get to the pumps without taking the strainers out 1st. |
Originally Posted by GettinKnotty
(Post 3078157)
I don't think Dave has to worry about that he takes the engines out every year! and usally puts bigger ones back in.:lolhit:
One in the cruiser and one in the Baja you'd be set! |
Originally Posted by Irishtornado
(Post 3078202)
LOL I'm ahead of schedule this year. I've got my 500's forsale now.
One in the cruiser and one in the Baja you'd be set! |
| All times are GMT -5. The time now is 03:19 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.