![]() |
Baja section on life support?
WTF? Nothing in here for a month or better now to speak of.
Isn't anyone doing anything? |
Yea.....finally boating in the North East!! :drink::drink:
|
I've been busy......working on my junk, and spousal duties, and riding around in other peoples boats:drink:
|
Originally Posted by JaayTeee
(Post 2865170)
I've been busy......working on my junk, and spousal duties, and riding around in other peoples boats:drink:
|
Just busy racking up hours on a new boat and sucking down some gasoline. With no off season, speed-enhancement projects will probably just get pushed off just like the last boat.
|
Originally Posted by JasonSmith
(Post 2865184)
but I get too much beer in me doing that.
|
Originally Posted by JaayTeee
(Post 2865186)
.....not that there's anything wrong with that:drink:
I packed 10 beers last Saturday for all day. Started at 11:30 & was out by 2. I think I need a pace car. |
JT, you took off awfully early Saturday, I did'nt think you had that much to drink.
|
1 Attachment(s)
Originally Posted by JasonSmith
(Post 2865191)
Other than I go t!ts up by 3pm & miss out on the rest of the day.
I packed 10 beers last Saturday for all day. Started at 11:30 & was out by 2. I think I need a pace car. noon.....probably didn't eat anything before that either, huh ? It's early in the season, you probably don't have your tolenances built up yet ;) They made me ride around in this last Sat. They made me handle the truck and trailer duties, made me deal with all lines and bumpers, and even made me sit in one of the back bolsters, .....I barely had time to drink:rolleyes: |
Originally Posted by JasonSmith
(Post 2865191)
Other than I go t!ts up by 3pm & miss out on the rest of the day.
I packed 10 beers last Saturday for all day. Started at 11:30 & was out by 2. I think I need a pace car. |
Originally Posted by nomomoney
(Post 2865274)
You need a bigger cooler..
|
Up to two pages in just 4 hours:drink:
|
So, I'm going to go get the boat & put in some fuel pump relays today & hopefully get it all back together by Friday for a run down here on Cedar Creek.
Let's hope all my parts get here today. |
Originally Posted by JasonSmith
(Post 2865388)
So, I'm going to go get the boat & put in some fuel pump relays today & hopefully get it all back together by Friday for a run down here on Cedar Creek.
Let's hope all my parts get here today. :kiss: |
Originally Posted by JasonSmith
(Post 2865144)
WTF? Nothing in here for a month or better now to speak of.
Isn't anyone doing anything? hey guys, newbie here to OSO, need some fuel system help with my 05' 496HO b1x w/140hrs. I have a custom 3.5psi Procharger on my 25OL, custom because I relocated it. In the OL from the center of the crank pulley to the stringer is 16.5", the stock procharger sits 19"-20" off the motor, that would have meant alot of cutting, no thanks. So I relocated it above the stringer and used a 68" belt, works good so far with no cutting. Anyhow I need advice on a fuel system and ECU, does the ecu need a reprogram for low boost setups? I'm staying with low boost, I don't have alot of faith in the 496 so until I tear it down and throw some forged stuff in, it'll be 3.5psi for now. The 05' 496's have the cool fuel box with the pump, filter, separator, and cooler all in one with no return line, is this useable? or scrap it? I hear the ATI regulator is trash too, so I need advice on pumps, regulators, coolers, and fuel rails if I need them. I've got a water pressure, fuel pressure, boost and a EGT gauge along with the procharger. Here are a few pics of my OL and procharger build. Thanks fellas. Stan. Attached Thumbnails |
I noticed that this place has been pretty slow too. So is SO Baja section. I haven't check TBM in quite a while.
I did Desert Storm Poker Run a couple weeks ago! :coolcowboy::cool: Going to race in the Rum Run in July. Oh, got a new aluminum swim step for my boat. Freshly powder coated and ready to go. Hope to get it on in the next couple weeks. Anyone want a fiberglass one? Replace cup holders with new aluminum, except for the passenger front one. Have to remove the grab handle to make enough room to slip in the cup holder. The handle is blind screwed and I'm a little hesitant to pull off the padded side panel to gain access. Don't know if it's just glued on or what. What else? Oh, polished my props again. That's it! |
I put some labbed 26 Bravo's on the boat, just need some motors to spin them now. . just kidding they are doing fine.
Pulled the swim platform off the boat and replaced my steering hoses. Sun is hard on parts, swim platform was turning pink and the hoses were wrecked. Guess I should get a longer slip at the next place. Going to try white on the platform this time to reduce the sun fade and make the boat look longer! :drink: |
LIFE SUPPORT:eek:
Please don't pull the plug!:evilb: |
Off topic, but since were keeping it alive... What would two 496 mag ho be worth with 110 hours. They are in my 2006
|
Originally Posted by dlange
(Post 2866287)
Off topic, but since were keeping it alive... What would two 496 mag ho be worth with 110 hours. They are in my 2006
|
Originally Posted by JasonSmith
(Post 2865144)
WTF? Nothing in here for a month or better now to speak of.
Isn't anyone doing anything? |
Hmmm. I was hoping more. On another note, what do you guys think of the whipple kits for the 496. I thought that, and my labbed props may get lucky and hit 78-79?
|
Originally Posted by dlange
(Post 2866359)
Hmmm. I was hoping more. On another note, what do you guys think of the whipple kits for the 496. I thought that, and my labbed props may get lucky and hit 78-79?
As with anything they are only worth what someone is willing to pay. You may find a buyer for more $$$. Talk to Bobby Todd aka "Crayola Crazy" about the Whipples on the 496. He has done it twice now and I think if he could go back to square one he would have build complete new motors. Good luck |
Originally Posted by dlange
(Post 2866359)
Hmmm. I was hoping more. On another note, what do you guys think of the whipple kits for the 496. I thought that, and my labbed props may get lucky and hit 78-79?
Buy or build another set suited for what you want to accomplish. Get the $$$ out of the 496's while you can. Supercharging them makes them pretty much worthless in the eye of a potential buyer. A friend of mine has a pair of pro-charged 502mpi's in a 36 O/L, that he's trying to sell, and he cant even give the boat away......every one is scared of the engines/superchargers. |
Originally Posted by JasonSmith
(Post 2865144)
WTF? Nothing in here for a month or better now to speak of.
Isn't anyone doing anything? Jason, Go over and tell your friend Blake to stop being mean to us.....he said we SUCK I may have to seek therapy if this continues:rolleyes::D |
New Baja out of Fountains factory:
http://www.teamshogren.com/new-boats...22-hammer.html I have my thoughts, discuss... :) |
Originally Posted by Dock Holiday
(Post 2866348)
Do you see Mr. Fountain giving us anything to talk about?
|
Originally Posted by Tristar Racing
(Post 2866624)
New Baja out of Fountains factory:
http://www.teamshogren.com/new-boats...22-hammer.html I have my thoughts, discuss... :) Do these engine vents make my butt look big ? |
The Hammer X has to be one of the ugliest boats ever to be made.
|
Originally Posted by JasonSmith
(Post 2866647)
The Hammer X has to be one of the ugliest boats ever to be made.
|
Originally Posted by JaayTeee
(Post 2866560)
What model boat ?
Supercharging them makes them pretty much worthless in the eye of a potential buyer. A friend of mine has a pair of pro-charged 502mpi's in a 36 O/L, that he's trying to sell, and he cant even give the boat away......every one is scared of the engines/superchargers. |
Originally Posted by Tristar Racing
(Post 2866624)
New Baja out of Fountains factory:
http://www.teamshogren.com/new-boats...22-hammer.html I have my thoughts, discuss... :) |
Originally Posted by Dock Holiday
(Post 2866400)
Brand new 496 HO's were on the market last year for under $8K. I saw several advertised and could not believe how low they were priced.
As with anything they are only worth what someone is willing to pay. You may find a buyer for more $$$. Talk to Bobby Todd aka "Crayola Crazy" about the Whipples on the 496. He has done it twice now and I think if he could go back to square one he would have build complete new motors. Good luck |
its got a ghetto booty.
i feel inspired to go look at some pics of beyonce now. |
Originally Posted by JasonSmith
(Post 2866647)
The Hammer X has to be one of the ugliest boats ever to be made.
Now if I win I think I'll buy a new Hammer X and with a custom paint job consisting of the back end being painted like a bare butt and the rest of the boat could be jeans and a chick bending over. |
Jason i hear you are water trialing Wild's TG over Memorial. :poopoo: :popcorn:
|
Originally Posted by BDiggity
(Post 2866925)
Jason i hear you are water trialing Wild's TG over Memorial. :poopoo: :popcorn:
|
Originally Posted by JaayTeee
(Post 2866614)
Jason,
Go over and tell your friend Blake to stop being mean to us.....he said we SUCK I may have to seek therapy if this continues:rolleyes::D Guess what? I like to drink beer, but it doesnt mean I want to sit in the same bar all the time! Im counting down the minutes till Jason gets the boot! :ban: :musik010: |
Originally Posted by TEAMBAJA
(Post 2867262)
Im counting down the minutes till Jason gets the boot! :ban: :musik010:
|
Originally Posted by JasonSmith
(Post 2867284)
I doubt that will happen. I give a sh!t if it does, but I really have that attitude about almost everything in life. If something happens, I just roll with it.
|
| All times are GMT -5. The time now is 08:31 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.