Blowers, who's running them?
 

Who is running Blowers, superchargers, prochargers, etc in their Baja's?

List your Cubic Inches, Brand of blower, PSI, Horsepower and RPM, plus show us a picture.

I'll start:

540 CI
Whipple Stage II
6.5 PSI
824 HP
5500 RPM

Built by Mark Boos - Precision Marine - Kenner, LA

I am!

454 MPI's with a little cam & some aluminum heads
2.3L Whipple side mounts
9lbs boost
Enough HP to break drives on command
5600+ RPM
Ben "The Motorman" Bowman, Wichita, KS
http://mefituning.com/

I'm looking forward to seeing how Dawg's run...should be interesting for sure.

Mines just got the stock
Weiand 256 blowers that
came on the 575SCi's.

I think they're only 4-5 psi

502 c/i
Dart Iron eagle heads
Gellner spec'ed HR camshaft.

Hp estimate...650-675 ??

Pic's.....they look exactly like any stock 575SCi

Oh....and I have one of Jason's stickers too ;)

Jason it STILL baffels me that you got all that under the hatch.
Hell I dropped the power ster res cap once in my 29 and had to hold the wife UPSIDE down to grab it.
Very nice.!

Dawg's boat ought to run like a rapped ape. Ben thinks it should make 900hp pretty easy with an aggressive tune & a little more boost.
We'll know in a few weeks. I think it is close to being done.

It is tight, but it is workable.
I blew up a water hose on Saturday at the Shootout. I couldn't pull the hose out so now there is a broken hose & a new hose in there. Only took 3 hours to change it.
Normally, I pull the upper back seat out & take off the manifold. That gets the Whipple out of the way & then stuff more accessible that way. It is not necessary, but helps in making more room.
Honestly, the Dana exhaust is the biggest room hog in there.

And he wants me to ride in that rocket???:party-smiley-004:

It may be a member of the 90+ club if he is brave enough to take it there.

Dawg's no fool,but if it'll get to 90+ safely he'll take it there...NO FEAR