Originally Posted by Evolution

The reason why we can predict the speed is because we have been building and designing high performance boats most of our lives. We know what it takes to make these boats able to run these speeds. : Boat weight 9,000 lbs; 1050hp total; 5200 rpm; PEF of 290; 1.5 gear ratio, 34 pitch prop; YOU DO THE MATH IF YOU KNOW HOW!
Evolution Performance Boats

Originally Posted by PURPLE HORNET

What I don't understand is why you are promoting a boat that does not exist. I strongly feel you should have kept your trap shut till the boat was built.

You came on to strong with your comments like these.

With twin staggered 525 mercury’s you will be able to reach est. speeds of 100 mph. Anyway, with our new twin stepped Constant Lift hull design we will out run, out handle and out perform any of the competition out there.



Then you post pics of a Skater, then when your bluff was called you admitted that it was a Skater 399 top deck. And the hull is the only thing that's being designed

I figured with all the boat building experience and marketing knowledge you claim to have you should have known better. You are already trying to sell T-shirts and coffee mugs on your website.

Good luck brother maybe your partners need to take your keyboard away and give you a sanding block. Before you sink this boat before it gets built.

Originally Posted by TEAMBAJA

Could these be ordered with power from Raylar or ILMOR?

Originally Posted by Evolution

We never said we were listed as a vendor at the show we said if anyone wanted to meet up with us at the Miami boat show than give us a call.

The reason why we can predict the speed is because we have been building and designing high performance boats most of our lives. We know what it takes to make these boats able to run these speeds. : Boat weight 9,000 lbs; 1050hp total; 5200 rpm; PEF of 290; 1.5 gear ratio, 34 pitch prop; YOU DO THE MATH IF YOU KNOW HOW!

We took the pics off the website cause we were tired of hearing all the negative comments. Our boat evolved from the 399 skater. The pics were just to represent how the boat would look since we have the tooling for that deck.


Thanks,

Evolution Performance Boats

Originally Posted by PURPLE HORNET

You came on to strong with your comments like these.

Originally Posted by crayolacrazy

whyare you fueling this BS

Originally Posted by crayolacrazy

Nothing from nothing = nothing, testy arnt we .I dont have to prove anything I took 71 mph Baja to 100 mph and every boat I touch is faster thats a fact .

Originally Posted by TEAMBAJA

Just a simple question to see if they are doing their homework, thats all.




No offense, but an open checkbook will make ANY boat fast. With that being said, check your receipts and you own the most expensive 33 Outlaw on the planet.

Originally Posted by costaricaboats

1st On the dead rise issue. Measuring on a transverse plane, say at the transom, a hull with a pad has (one dead rise) from the keel to the pad edge, from the pad edge to the main strake is (another dead rise), from the strake to the chine is (another dead rise), so to average is 19.5 along that location. Prior art might have a published 22 degree dead rise, this could be for a non-pad boat. We have designed and dealt with most all of the sport boat manufactures, and many have a constant dead rise to approx. mid ship's, maybe this is not the best, we won't say who, that would not be appropriate.

2nd As for the pictures, we used some pictures from some of the best designs and builder's to show what we have in mind for the basic styling. If we all are honest,, doesn't all the sport boats look alike, in general? The attention to detail, performance and service is most important in this industry. Where did the first deep vee come from? We believe if you where to quiz allot of the existing builders about where did they get there idea's from, we are sure the idea's would be from the best in the industry. Remember the hull is a completely fresh evolution of 40+ years of racing and designs for some of the best builders in the world.

3rd On the factory. If you all where to ask some of the best,(Peter at Skater), did he start out where he is today, even Reggie started with dreams and passion to establish the bar to meet or beat. Without dreams and passion, where would innovation be, where would improvements come from. During this time in our market, maybe some fresh and good positive comments might spark some interest.

There is more to say, but we don't want to take up to much of your time.

Thank you for your interest and comments,
costaricaboats