26 Outlaw with 525
 

I am leaning towards getting a 26 outlaw but I am hoping to get a little more speed out of it than low 60's. I see most of the guys running a 496 HO are topping out at an honest 63-64. Is anyone running a 525 in the 26? If so what speeds are yall seeing? Thanks in advance!

id have to say a 525 would put you in the high 60's. however the 26 has a strange riser set up that im not 100% sure the cmi's on a 525 would fit on a 26 ol. might, but you may need to dig into that and be sure no cutting is required

525 was a factory option not sure of the speeds, I would guess that with just engine and nothing else you should see low 70's.

My .02, you can get a LOT of boat for what a 26 OL w/525 will cost. I'd shop around a bit. Many boats that size or bigger can run upper 70's, even into the 80's w/525.

Thanks for the input. I will keep shopping around.

I agree with Baja_man. The boat runs 64-66 with a 496HO as the normal number depending on non labbes or labbed props ect, so the math would suggest 71-73 with a 525EFI.

It also came with a 600SCI. I wonder how many of those Baja build.

Buy one and cram an Ilmor 725 in there:D :coolcowboy:

Before I did the Raylar I had thought about a Ilmor 625.

Just curious. What speed and power do you see with the Raylar parts? 103 kit?

A 26ol with a v10 screamin' at 6300-6500 rpm's would be something not seen everyday. Should be run dry to the tips of course:evilb:

Still working thru some small issues so speed not accurate at this point. It seems I am only getting a 2/3 throttle (4300-4500 RPM's) but seeing 71-72 GPS.

BCK-106 kit, dyno'd at 660 HP @5400 RPM's

Timing or fuel delivery issue?