I am leaning towards getting a 26 outlaw but I am hoping to get a little more speed out of it than low 60's. I see most of the guys running a 496 HO are topping out at an honest 63-64. Is anyone running a 525 in the 26? If so what speeds are yall seeing? Thanks in advance!

id have to say a 525 would put you in the high 60's. however the 26 has a strange riser set up that im not 100% sure the cmi's on a 525 would fit on a 26 ol. might, but you may need to dig into that and be sure no cutting is required

525 was a factory option not sure of the speeds, I would guess that with just engine and nothing else you should see low 70's.

My .02, you can get a LOT of boat for what a 26 OL w/525 will cost. I'd shop around a bit. Many boats that size or bigger can run upper 70's, even into the 80's w/525.

Thanks for the input. I will keep shopping around.

I agree with Baja_man. The boat runs 64-66 with a 496HO as the normal number depending on non labbes or labbed props ect, so the math would suggest 71-73 with a 525EFI.

It also came with a 600SCI. I wonder how many of those Baja build.

Buy one and cram an Ilmor 725 in there

Before I did the Raylar I had thought about a Ilmor 625.

Just curious. What speed and power do you see with the Raylar parts? 103 kit?

A 26ol with a v10 screamin' at 6300-6500 rpm's would be something not seen everyday. Should be run dry to the tips of course

Still working thru some small issues so speed not accurate at this point. It seems I am only getting a 2/3 throttle (4300-4500 RPM's) but seeing 71-72 GPS.

BCK-106 kit, dyno'd at 660 HP @5400 RPM's

Timing or fuel delivery issue?