|
Originally Posted by puzzleboy
(Post 3579169)
My buddy's looking at this boat for sale. I suspect it's a 29', but the ad says it's a 1995 30'.
I'm guessing this is a 1995 Outlaw SST 29', is that correct? Can anybody tell me much about these models? Good, bad, etc.? My knowledge is pretty much limited to my 272. Curious about the cuddy configuration, etc. Would it have a cookstove or fridge in it? Separate head, or one under the bed? This one has twin 454s (carbed I'm guessing). There used to be a site where you could download factory brochures from Baja, but I can't seem to find it anymore. Anyone know where these can be had? Specs would be awesome too, going to look at it Thursday. Thanks all! http://img513.imageshack.us/img513/6052/baja290.jpg By puzzleboy at 2011-12-27 |
Yep, this is a regular 290 according to the forum...
|
Good looking ride.
|
Originally Posted by 500hps
(Post 3580844)
my 97 322 with warmed up 500s runs 83.tons of room,include head,cook top.great family boat.may be for sale.
I own a 322 with 454s procharged 2x600HP and it runs 80mls(Gps)?! |
Well, went to look at her today, and my buddy bought her! Good deal too. Needs a bigger truck now.... lol Trailer is a Tech Sun.... never heard of them, but looks well built.
Pretty clean condition, needs some small things. It's missing the small fairings/covers that go over the rear air vents, on the black swoosh (see picture 2, circled in red). Anybody know where these can be had? Otherwise going to have to make something up in fibreglass which would be a lot of work. Also needs a bow rail end piece, head door hinge, some decals, trailer spare wheel/tire, stuff like that. Boat was apparently used on Lake Cumberland - anyone know the boat? He'd like to redo the gauge panel with bezels or new gauges. Not sure what's available yet. Here's a pic I took today with my phone. http://img851.imageshack.us/img851/7822/s290g.jpg Uploaded with ImageShack.us http://img202.imageshack.us/img202/6...errequired.jpg Uploaded with ImageShack.us |
Could be a tough part to find. Pretty sure '95 was the last year for the 290. May need a donor boat to take a mold.
|
Yep, was thinking that if I could get a hold of two good pieces..... Or just craft something that looks decent.
|
2 Attachment(s)
Originally Posted by puzzleboy
(Post 3581883)
Yep, was thinking that if I could get a hold of two good pieces..... Or just craft something that looks decent.
Since the area is black you could also find some black, or dark smoked 3/8" plexiglass and heat it to curve and mold a cover. Good colors on that boat for a 95'. Many of them were Pink, or Teal colors. |
Thanks Dave. If the guy has the mold(s) that would be great! Your other idea is good too. The guy's an aircraft sheetmetal mechanic, so I wouldn't rule out something in aluminum either.
Yeah, the boat doesn't look too bad. Graphics have been repainted, and the interior looks really good. Original vinyl I think. |
1991 029 baja twin 350 mags
Question i dont see many like mine at all it does have a 2 foot swim plat form on the rear so is this boat a 029 offshore or a 029 ca it ha s a cuddy cabin and very well built it also has 2 port windows on the front of the boat both sides any info would be great guys i have had it for going on 13 years in okc
|
| All times are GMT -5. The time now is 06:42 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.