working on my 24 outlaw
01-24-2014 | 10:17 AM
#31
Thread Starter
Registered
Joined: Nov 2011
Posts: 197
Likes: 7
From: Gardner, KS
just trying to get some motivation. We are in the middle of getting this thing going again. Hope this things runs upper 70's time will tell.
http://www.youtube.com/watch?v=f0VBgUK8AZU
http://www.youtube.com/watch?v=f0VBgUK8AZU
Last edited by 86Capri; 01-24-2014 at 10:23 AM.
03-26-2014 | 03:08 PM
#32
Thread Starter
Registered
Joined: Nov 2011
Posts: 197
Likes: 7
From: Gardner, KS
Thought I would try out this hydrographics on the intake and valve covers. I went with a red carbon fiber look thought it looks pretty neat. Oil pan might have been a bit much but I was there and who cares you can barley see it once in the boat.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
03-27-2014 | 09:41 AM
#34
Thread Starter
Registered
Joined: Nov 2011
Posts: 197
Likes: 7
From: Gardner, KS
It is as durable as the paint on the outside of your car. He can do hydro-graphics over anything that can be painted. First they prime the piece. Then paint the main color for example on mine we painted it red. Then they dip the part through this film and then they just clear coat it.
Cost is more then reasonable. Valve covers were $60
http://www.youtube.com/watch?v=pKuXyeAGzEU
Cost is more then reasonable. Valve covers were $60
http://www.youtube.com/watch?v=pKuXyeAGzEU
Last edited by 86Capri; 03-27-2014 at 10:47 AM.
06-30-2014 | 09:34 AM
#35
Thread Starter
Registered
Joined: Nov 2011
Posts: 197
Likes: 7
From: Gardner, KS
We are getting closer. I will try to get a better video and some results. This video is just the first fire so we were holding it around 1800 for the rings.
http://www.youtube.com/watch?v=ofnQkYSNWpg&feature=youtu.be
http://www.youtube.com/watch?v=ofnQkYSNWpg&feature=youtu.be
07-01-2014 | 10:02 AM
#38
Thread Starter
Registered
Joined: Nov 2011
Posts: 197
Likes: 7
From: Gardner, KS
