Will a 24 Outlaw fit on a 272 Trailer?
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Overland Park, KS 87mm Loto
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Will a 24 Outlaw fit on a 272 Trailer?
Will a 24 outlaw fit on a 272 trailer with out modification? From what I read there the same width and dead rise and overal hull length is close and the 24 has a extension box. got a good deal on the trailer was just wondering if i needed to mod the trailer before i put the boat on it.
#4
Registered
Join Date: Apr 2010
Location: Lake Travis
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
You can't host pictures on here unless you have a paid account. You need to use a third party host, like this.
http://tinypic.com/
http://tinypic.com/
#5
Registered
Join Date: May 2011
Location: Toronto, ON
Posts: 487
Likes: 0
Received 0 Likes
on
0 Posts
272 hull is basically a 25 foot running surface, with 2' of swim platform overhanging at the back.
I would think your trailer will work just fine, especially if the bunks are set at the same deadrise.
The only issue I could see is if the strakes are different between models, and those could end up on a bunk (I went through this) instead of interspaced..... XT would probably know right off if there are any differences.
Easiest thing - try it! And make sure you've got adequate tongue weight for decent towing. You might have to move the bunks/boat/axle as applicable to acheive this, but I think the boats or so similar that you shouldn't have an issue if it was set up properly before.
I would think your trailer will work just fine, especially if the bunks are set at the same deadrise.
The only issue I could see is if the strakes are different between models, and those could end up on a bunk (I went through this) instead of interspaced..... XT would probably know right off if there are any differences.
Easiest thing - try it! And make sure you've got adequate tongue weight for decent towing. You might have to move the bunks/boat/axle as applicable to acheive this, but I think the boats or so similar that you shouldn't have an issue if it was set up properly before.
#6
Registered
#7
Registered
Thread Starter
Join Date: Aug 2007
Location: Overland Park, KS 87mm Loto
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Ok here are some pics of the boat and the trailer.
http://s1266.beta.photobucket.com/us...ry/?view=media
http://s1266.beta.photobucket.com/us...ry/?view=media