Will a 24 Outlaw fit on a 272 Trailer?
 

Will a 24 outlaw fit on a 272 trailer with out modification? From what I read there the same width and dead rise and overal hull length is close and the 24 has a extension box. got a good deal on the trailer was just wondering if i needed to mod the trailer before i put the boat on it.

I couldn't tell ya, but i'd like to see pics of the boat.

It wont let me post pictures. whats the way basic members can post pictures?

You can't host pictures on here unless you have a paid account. You need to use a third party host, like this.

http://tinypic.com/

272 hull is basically a 25 foot running surface, with 2' of swim platform overhanging at the back.

I would think your trailer will work just fine, especially if the bunks are set at the same deadrise.

The only issue I could see is if the strakes are different between models, and those could end up on a bunk (I went through this) instead of interspaced..... XT would probably know right off if there are any differences.

Easiest thing - try it! And make sure you've got adequate tongue weight for decent towing. You might have to move the bunks/boat/axle as applicable to acheive this, but I think the boats or so similar that you shouldn't have an issue if it was set up properly before.

Photobucket.com for pics

Ok here are some pics of the boat and the trailer.

http://s1266.beta.photobucket.com/us...ry/?view=media

Nice, what kind of speed are you seeing?

88.7 with the maximus going to be testing another 5 blade soon

How much power is the engine making? It is a stock 496 Mag HO (425hp) and the Whipple is making how much boost?