http://greatlakesskipper.com/product...at-switch.html

Something like that?

Thats the closest so far. That one has a 3 pin set-up. The current one has a 6 pin DPDT set up. Which correct me if im wrong but I can set up the 3 pin to control relays at the actuator itself which would also reduce the load through the switch and provide more current to the motor.

From your link, I found http://greatlakesskipper.com/product...at-switch.html
I'm confused though. It is titled "Carling Momentary On/Off Momentary On." I assume this is not the same as On-Off-On momentary..?

Thanks for the leads!

I found this.

http://www.searay-parts.com/Carling-...icalvld1-1.htm

I'm thinking its close enough to fit in the hole and make connections.

What switch do you need I have several extras? It's just the dual throw momentary right.

Sorry just looked don't have one of those.

http://greatlakesskipper.com/product...at-switch.html


That more like it?

That's the one I found earlier and I am somewhat confused with the way they have it titled.
"Carling Momentary On/Off Momentary On". I have never seen them titled like that. I typically see "Momentary On/Off/On".

What is your take on this? Am looking at it too hard?

I should have some extra ones. I will look tonight or tomorrow to see. If I do I will be glad to send you one. It should be the same switches they use for the trim tabs and drive trim. You are correct they are on/off/on.

No rush. I think I'm going to purchase a whole switch panel with switches and covers so that I can swap out white switches for black and have the spare switches too. I figured its cheaper in the long run to go that route instead of buying each individual black switch cover and to have a spare switch here and there.

You want a Mom ON/OFF/Mom ON

I walked into West Marine and bought one off of the shelf. I have also seen them at CARP and several other places as well. Not hard to find.